The Settings panel of the Incident manager object

1

Identification number* field

Automatically

Displays the identification number of the Incident manager interface object in the system

Positive integers

-

Depends on the number of Incident manager objects in the system

2

Name* field

Type-in the value in the field

Sets the name of the Incident manager object in the system

Latin, Cyrillic and service characters 

Incident manager

A string containing a sequence of any characters (letters, numbers, service characters except for > and <), case-insensitive.

Number of characters - from 1 to 60

3

Disable checkbox

Set the checkbox

Sets the state (enabled or disabled) of the Incident manager object in the system

Boolean type

No

Yes - the Incident manager object is disabled and not used

No - the Incident manager object is enabled and in use

4

Display drop-down list

Select from the list

Names of Display objects created in the system

Name of parent Display object

Depends on the number of Display objects in the system

5

X field

Type-in the value in the field

Sets the coordinate of the upper left corner of the Incident manager interface window along the horizontal X axis

% relative to screen width

-

From 0 to M*100, where M is the number of installed monitors

Y field

Type-in the value in the field

Sets the coordinate of the upper left corner of the Incident manager interface window along the vertical Y axis

% relative to screen height

-

From 0 to M*100, where M is the number of installed monitors

6

W field

Type-in the value in the field

Sets the width of the Incident manager interface window

% relative to screen width

-

From 0 to M*100, where M is the number of installed monitors

H field

Type-in the value in the field

Sets the height of the Incident manager interface window

% relative to screen height

-

From 0 to M*100, where M is the number of installed monitors

7

Allow moving checkbox

Set the checkbox

Allows to manually change the position of the Incident manager window

Boolean type

No

Yes - allow to manually move the Incident manager window

No - prohibit to manually move the Incident manager window

Opens a test window for specifying the position of the Incident manager interface window

Select from the list

10

Type drop-down list

Select from the list

Available object types

-

Depends on objects created in the system.

Only those object types are available for selection for which the value "INFORMATION" or "ALARM" is selected on the Events tab in the Processing messages column in the ddi.exe utility (see The Events tab).

11

Number drop-down list

Select from the list

Positive integers

-

Depends on the number of objects of the specified type created in the system

12

Name drop-down list

Automatically

Sets the name of the object by which the events in the Incident manager window should be displayed

Names of objects created in the system

-

Depends on objects created in the system.

13

Event type drop-down list

Select from the list

Events available to the selected object

-

Depends on the object type

A string containing a sequence of any characters (letters, numbers, service characters except for > and <), case-insensitive.

Number of characters - from 1 to 255

16

Interfaces for escalations list

Set the checkbox

Specifies the Incident manager objects to which the operator can escalate events

List of Incident manager objects available in the system

-

Depends on the number of Incident manager objects created in the system

1

Select from the list

2

The element that will be displayed first for the operator when processing the event.

To select the starting element:

1. Select an element in the table.
2. Click the Edit button.
3. Set the Starting element checkbox.
4. Click OK.

Yes - the element is the starting element in the logic.

No - the element is not a starting element in logic.

Only one element in the logic can be the starting one.

3

4

Select from the list

Image

Button

Comboboxes

Comment

Radio buttons

Checkboxes

5

Opens a window for editing the selected element (see Configuring the elements)

Address of the server to which the data about the operator's actions in the Incident manager should be sent.

Attention! This feature is not available in the current Intellect version.

Enables the operator to close the events in the Incident manager without processing them.

Yes - the operator can close events without processing.

No - the operator cannot close events without processing.

A hotkey, using which the operator can start processing the event. To set the hotkey, place the mouse cursor in the field and press the required key or key combination on the keyboard.

All possible keyboard keys and key combinations using Ctrl, Shift and Alt.

Select from the list

List of Map objects available in the system

Depends on the number of Map objects created in the system

Select from the list

ActiveX - archive will open in a separate window.

Monitor - archive will open on the selected Surveillance Monitor.

Priority description. If the priority description is set, then it will be displayed in the Incident manager, otherwise the priority number will be displayed.

A string containing a sequence of any characters (letters, numbers, service characters except for > and <), case-insensitive.

Number of characters - from 1 to 255

The width of the columns in the event handling interface in pixels or as a percentage of the entire width of the Incident manager interface.

Sets the number of columns when displaying the event processing logic in the Incident manager interface

Sets the way of filtering events in the Incident manager

by operator — the operator can choose the filtering method in the Incident manager interface.

by default — the event filtering is disabled.

by region — the events are filtered by region.

by event — the events are filtered by event type.

by object — the events are filtered by object.

Sets the ability to block events in a filtered group for processing by other operators in case if one operator has already started processing an event from the group. In this case, the events of the group are available for processing only by this operator.

Yes - events of the filtered group are blocked for other operators if one operator has already started processing an event from the group.

No - events of the filtered group are not blocked if the operator has already started processing an event from the group.

Sets the ability to close the entire filtered group of events when processing one event from the group

Yes - closing the filtered event group is enabled

No - closing the filtered event group is disabled

no grouping - all events will be displayed in the event display window without grouping. If filtering is set, then all events of the selected filter will be displayed.

by event - the events will be grouped by object type / object ID / event type / logic ID.

Sets the event display options within a group

Yes - only the first event from the group is displayed, the rest of the events are closed without processing after the first event is processed

No - all events of the group are displayed