Configuring the image

Configure the image as follows:

1. On the Logic tab, select the required element in the table and click the Edit button.
   
2. If necessary, in the Label field (1), enter the text that will be displayed in the column to the left opposite the element.
   
3. If necessary, in the Image field (2), enter the path to the image on the disk. If the path is not specified, the frame from the video camera will be used.

4. In the Label text field (3), enter the text that will be displayed on the button.

   Note

   If there are any event parameters, you can set them in the label text. To do this, in the Label text field, enter $<parameter name>$. For example, if you specify $time$, then the time of the event will be displayed on the button, if you specify $date$ — the date will be displayed, if $user_id$ — the user ID will be displayed (see Database tables reference guide for Intellect and vertical solutions).

5. In the Map screenshot field (4), select True if it is necessary to display a screenshot from the map.

   Note

   To use the Map screenshot, the object should be added to the map and the map should be selected in the Incident manager settings (see Configuring the main parameters of the Incident manager).

6. In the Default transition field (5), select the element that should be displayed after clicking on the button.
7. If it is necessary to execute a macro command by clicking the button, select it from the Macro list (6).
8. Click OK.

Example of displaying the Image element: