Configuring an RTSP-Server

Axxon One supports RTSP streaming from cameras (see Get camera live stream and Get archive stream).

To configure an RTSP-Server:

1. Select a Server object.

2. In the RTSP port field, specify the port number that will be used for RTSP data transfer (1).
   

3. In the RTSP/HTTP port field, specify the port number for transfer of RTSP data via HTTP tunnel (2).

4. Click the Apply button.

Configuration of the RTSP-Server is now complete.

To receive videos from an RTSP-Server, use the following link format:

• Live: rtsp://login:password@IP-Address:554/hosts/HOSTNAME/DeviceIpint.N/SourceEndpoint.video:0:0 − high quality stream;
           rtsp://login:password@IP-Address:554/hosts/HOSTNAME/DeviceIpint.N/SourceEndpoint.video:0:1 − low quality stream.
• Archive rtsp://login:password@IP-Address:554/archive/hosts/HOSTNAME/DeviceIpint.N/SourceEndpoint.video:0:0/20160907T050548.723000?speed=1.

where:

• login:password − user login and password in the Axxon One VMS.
  

  Attention!

  For correct operation of the RTSP-Server, a user name has to match the following rules:

  • start with a letter;
  • contain only Latin, numerical and following extra characters: "/", "-", "_", ".", ":", "+".

  
  

• hosts − permanent section of a link.
• HOSTNAME − server name.
• N − camera ID in the Axxon One VMS.
• SourceEndpoint.video:0:0 − permanent section of a link.
  
• speed − a parameter required for receiving video streams from an Archive.