Documentation for Axxon PSIM 1.0.0-1.0.1.

Previous page Configuration of the AxisQ7401 video server  Configuration of the Intercom Subsystem of security intercom terminals Next page


The Beward DS06/DS91406M/DSN23215PS SIP-device is configured through the Web-interface the following way:

  1. Change IP-address of SIP-device on the LAN tab if it’s needed.

  2. Specify parameters of SIP protocol on the SIP tab according to the vendor's documentation. However, the following parameters marked on the picture below are to be set exactly as follows in order to use all integrated features of Beward DS06/DS91406M/DSN23215PS in Axxon PSIM:

  3. In the DTFM mode drop-down list, select SIP INFO.
  4. Set the default symbols for the Relay output commands:
    1. Relay out 1 (DTFM) – #
    2. Relay out 2 (DTFM) – 0
    3. Relay out 3 (DTFM) – *
  5. Click Save to save changes.

The Beward DS06/DS91406M/DSN23215PS SIP-device configuration through the Web-interface is now completed.

  • No labels