Configuring YUAN PD652 video capture card

Configure YUAN PD652 video capture card as follows:

1. Install the card drivers, but first disable the check of drivers digital signature.

2. Remove Intellect and IP DriverPack.

   Note.

   Information on how to remove Intellect can be found in the Removing INTELLECT™ software section of Administrator's Guide .
   IP DriverPack is removed from the OS Windows control panel.
3. Install IP DriverPack. The installation file can be found in the ipint.driverpack folder of Intellect distributive.

4. Install Intellect.

   Important!

   First of all install IP DriverPack and then install Intellect.
5. Connect cameras to YUAN PD652 and connect YUAN PD652 to the computer.
6. Start Intellect.  
7. Start  Camera discovery tool.

8. Select ITV in the list of available devices.

   

   Note.

   The capturedevice item can be available in the list. It is to be disabled.
9. Click the Apply button.
10. Corresponding devices are added to the Intellect object tree. 
11. Go to the settings panel of the created Video Capture Device object.
    
12. In the Signal dropdown list select the type of signal supported by the device: PAL or NTSC (1).
13. Click the Apply button. (2)

YUAN PD652 video capture device is now configured.