The Settings panel of the Computer object

The appearance of the settings panel of the Computer object is shown in the figures. The description of the parameters of the Computer object settings panel is given in the table below the figures.

The Archive Disks and Basic settings tabs:

The Operator tab:

The Protocol synchronization tab:

The Archive synchronization tab:

№	Parameter	Method for setting the parameter value	Parameter description	Symbols used	Default value	Value range
1	Network name*	Automatically	Displays the computer name in the local network	Latin characters and digits 0..9	-	Depends on the number of Computer objects registered in the system Number of symbols – from 1 to 15.
2	Name*	Enter the value in the field	Set the name of the Computer object in the system	Latin, Cyrillic and service characters	Computer	A line containing a sequence of any symbols (letters, digits, service characters apart from > and < symbols), not case-sensitive Number of symbols – from 1 to 60.
3	Disable	Is identified by the check mark	Defines the condition of the Computer object (enabled or disabled) in the system	Boolean type	No	Yes – the Computer is disabled and is not in use No – the Computer is enabled and is in use.
Disks for Archive Storage
4	Video	Is identified by the check mark	Set the disk for storing video archive from cameras and also audio archive during synchronous audio and video recording	Boolean type	No	Yes – the disk is used for video archive storing No- the disk is not used for video archive storing
5	Audio	Is identified by the check mark	Set the disk for storing audio archive from microphones	Boolean type	No	Yes – the disk is used for video archive storing No- the disk is not used for video archive storing
6	Disk	Automatically, specify the value in the field	Displays the names of local disks, accessible for storing video and audio archive, and also used to specify the network disks used for archive storing.	Names of local disks (Latin characters), names of network disks (UNC-pathes)	-	Depends on the total number of local and network disks
7	GB	Automatically	Contains information about free space on the every accessible disk	Disk space in GB	-	Depends on the total free disk space
8	Recording	Automatically, set the checkbox checked	Show current disk for storing archive	Boolean type	No	Yes – the archive is currently stored on the specified disk. No – the archive is not currently stored on the specified disk.
Settings Group
9	Connection	Enter the value in the field	Gives the name to the modem connection used in the Windows OS.	Latin, Cyrillic and service characters	-	A line containing a sequence of any symbols (letters, digits, service characters) Number of symbols – from 1 to 30.
10	Username	Enter the value in the field	Sets the login name for the existing Windows modem connection.	Latin, Cyrillic and service characters	-	A line containing a sequence of any symbols (letters, digits, service characters), case-sensitive. Number of symbols – from 1 to 30.
11	Password	Enter the value in the field	Sets the password for the existing Windows modem connection	Latin, Cyrillic and service characters	-	A line containing a sequence of any symbols (letters, digits, service characters), case-sensitive. Number of symbols – from 1 to 30.
12	Disable record-keeping	Is identified by the check mark	Switches off storing of events to the Event viewer database on the local computer.	Boolean type	No	Yes - events are not stored to the Event viewer database No - events are stored to the Event viewer database
13	Only local protocols	Is identified by the check mark	Activates logging to the database the Events viewer only information about events, registered on the given computer	Boolean type	No	Yes – only events, registered at this computer are logged to the database the Events viewer No – events, registered at this computer are not logged to the database the Events viewer
14	Time synchronization	Checkbox	Set time synchronization of all computers in the distributed system with system time of this computer. Time is automatically synchronized at midnight every 24 hours or when INTELLECT™ is started on the Server that is the source of time synchronization.	Boolean type	No	Yes – time is synchronized No – time is not synchronized
15	Events archive length	Type-in the value in the field	Sets the period of time for the events to be stored in the Event viewer database	Days	-	More than 1
16	Run x64 modules checkbox	Setting checkbox	Specifies the way of launch of 64-bits modules	Boolean type	Up to 4.10.2 – No From 4.10.3 – Yes	Yes - 64-bits module launches when the module launch attempt. If such variant is not found the 32-bits module launches. No - 64-bits modules are not launch
17	Use as client checkbox	Checkbox	Computer is used as the Client in the distributed video surveillance system	Boolean type	No	Yes – computer is used as Client. No – computer is used as Server or RAW.
18	Prevent Sleep mode checkbox	Checkbox	If the checkbox is selected when Intellect is running, Windows OS sleep mode will be disabled.	Boolean type	Yes	Yes - computer doesn’t go into sleep mode No - computer can go into sleep mode
19	Initial display	Is selected from the list	Set the screen to be displayed on default after starting of the Intellect digital video surveillance system. The last active Display is displayed after the Intellect restart if no one screen is selected.	Names of the Display objects registered in the system	-	Depends on total number of Display objects registered in the system.
20	Default user	Is selected from the list	Defines a default user, i.e., the user, the rights and authorities of which will be used to launch Intellect™ software without a password.	Names of the users registered in the system.	-	List of users registered in the Intellect™ system.
21	Camera discovery tool	Press the button	Access to creating, settings and editing of IP devices.	-	-	-
Operator
22	Speaker	Is selected from the list	Allows selecting the speaker that is to be in use for audio playback (use when SIP devices are installed in video surveillance system – see Configuring SIP-terminal).	Names of the Speaker objects registered in the system	-	Depends on number of the Speaker objects registered in the system
23	Microphone	Is selected from the list	Allows selecting the microphone that is to be in use for audio transmission (use when SIP devices are installed in video surveillance system – see Configuring SIP-terminal).	Names of the Microphone objects registered in the system	-	Depends on number of the Microphone objects registered in the system
24	Camera	Is selected from the list	Allows selecting the camera that is to be in use for video transmission (use when SIP devices are installed in video surveillance system – see Configuring SIP-terminal).	Names of the Camera objects registered in the system	-	Depends on number of the Camera objects registered in the system
Protocol synchronization
25	Synchronize	Is identified by the check mark	Set the synchronization of database The Events viewer of local and remote computers	Boolean type	No	Yes– database the Events viewer of local and remote computers are synchronized No– database the Events viewer of local and remote computers are not synchronized
26	Computer	Automatically	Displays the net name of remote computer with which database the Events viewer must be synchronized	Latin alphabet and service characters	-	Depends on the number of computers, registered in the system
27	Name	Automatically	Displays the name of remote computer in the net	Latin, Cyrillic and service characters		A line containing a sequence of any symbols (letters, digits, service characters), case-sensitive. Number of symbols – from 1 to 60.
28	Change connection string	Press the button	Access to settings and editing the parameters of connection to the database the Events viewer of remote computer	-	-	-
The Archive synchronization tab
29	Number	Select in the list	Sets the ID of camera the archive of which is to be synchronized when restoring the main Server (see also Configuring archive synchronization of main and backup Servers).	IDs of the Camera objects created in the object tree of the main Server	-	Depends on the number of the Camera objects registered in the system
30	Name	Select in the list	Sets the name of camera the archive of which is to be synchronized when restoring the main Server (see also Configuring archive synchronization of main and backup Servers).	Names of the Camera objects created in the object tree of the main Server	-	Depends on the number of the Camera objects registered in the system
31	Backup archive	Select in the list	Sets the Backup archive object configured to cooperate with the Failover service and used for synchronization of archive of the main and backup Servers.	Names of the Backup archive objects registered in the system	-	Depends on the number of the Backup archive objects registered in the system
32	Range	Click the button	Opens a dialog box for bulk camera selection	-	-	-
33	All	Click the button	Adds all created cameras to the table	-	-	-

Page tree

Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.