Configuring the STX-1000 ACS connection

The STX-1000 ACS connection is configured as follows:

1. Create an STX object on the Hardware tab.
   
2. Create a Transport channel object based on an STX object.
   
3. On the Transport channel object settings panel, in the IP (1) and Port (2) fields, specify the IP address and port of the Moxa server (see Pre-configuration of the STX ACS).
4. In the Poll timeout(msec) field (3), enter the time of the controller polling period in milliseconds. The controller polling period cannot be less than 500 ms.
5. Click the Apply button (4).

The STX-1000 ACS connection is now configured.