Setting up the Virdi ACU network connection

The Virdi ACU connection is configured as follows:

1. In the ACU IP field (1), enter the IP address of the controller.
   
2. In the ACU Subnet field (2), enter the subnet mask of the controller.
3. In the ACU Gateway field (3), enter the controller gateway.
4. Select the Dynamic IP check box (4) if the controller operates in a network with the DHCP protocol.
5. In the Server IP field (5), enter the IP address of the ACFA-Intellect Server.
6. In the Server port field (6), enter the port of the ACFA-Intellect Server.
7. Click the Apply button (7) to apply the settings.

The Virdi controller connection is set up.