Setting up the Virdi Terminal network connection

The Virdi terminal connection is configured as follows:

1. On the settings panel, go to the Network tab (1).
   
2. In the Terminal IP field (2), enter the IP address of the terminal.
3. In the Terminal Subnet field (3), enter the terminal subnet mask.
4. In the Terminal Gateway field (4), enter the terminal gateway.
5. Set the Dynamic IP checkbox (5) if the terminal operates in a network with DHCP protocol.
6. In the Server IP field (6), enter the IP address of the ACFA-Intellect Server.
7. In the Server port field (7), enter the port of the ACFA-Intellect Server.
8. Click the Apply button (8) to apply the settings.

The Virdi terminal connection is now configured.