Configuring Hikvision DS-K1F100 control reader in the Intellect software

The Hikvision DS-K1F100 control reader is configured as follows:

1. Create a Hikvision Control Reader K1F100 object based on the Computer object on the Hardware tab of the System Settings dialog box.
   
2. From the Card save mode drop-down list (1), select the format for saving the facility code and card code:
   • Hikvision format - saves all access cards in the Hikvision format (the facility code contains a fixed H character, the card code is a decimal number up to 32-bits).
   • Hikvision W26 text format - saves all access cards in Hikvision format, and the original facility code is added to the beginning of the card code.

   • Card + Facility code - saves EM-Marine access cards in Wiegand-26 format.

     Attention!

     Card + Facility code only works for EM-Marine Wiegand-26 access cards. Other types of cards will be saved in Hikvision format.

3. Click the Apply button (3) to save the settings.

The configuration of the Hikvision DS-K1F100 control reader is completed.