Setting up the transmission of video signals to IP-devices

INTELLECT™ software has the facility to transmit audio signals from microphones to IP-devices and to play them back with loudspeakers or headphones, connected to IP-devices.

Audio signal transmission to IP-devices can be performed in two ways:

1. with the help of interface object the Audio player;
2. with the help of system object the voice notification service.

The object Audio player is used to transmit audio signals from the selected microphones on the supported IP-devices.

To set up the transmission of audio signals with the help of the Audio player object do the following:

1. Go to the tab of setting up interface object Audio Player.
   
2. Enter the settings of the Audio player interface box (1).

3. Select the required IP-device from the dropdown list Device (2).

   Note.

    Select the value Virtual Cable to transmit audio signals to IP-device Bosch (see Setting up the transmission of audio signals to IP-device Bosch).
4. From the dropdown list Channel, select the required audio signals’playback channel (3).
5. In the field IP address enter the IP address of the selected IP-device (4).
6. If necessary enter user name and password in the fields User and Password to connect to the selected IP-camera ( 5-6).
7. From the dropdown list in the column Name select the object’s name Microphone, from which audio signal has to be transmitted to the selected IP-device (7).
8. Repeat step 7 for each selected microphone object.
9. Click the Apply button to save all the changes. (8).

Setup of the audio signal’s transmission with the help of Audio player object is completed.

Note.

To activate audio signals’transmition from the microphone to the IP-device click the button (Interception from microphone) in the Audio player interface box.

 Voice notification object is used to transmit files of WAV format to the supported IP-devices. Set up order of the object Voice notification service is described in the Setting up the voice notification.