Specifying the video recording parameters

Video recording includes the video image received from the camera overlaid with receipt data. To specify the video recording parameters, do the following:

1. Select the video recording mode in the Recording modes drop-down list (1). The following modes are available:
   1. Continuous recording - video is recorded continuously.
   2. Beginning/end of receipt record – video recording starts at the beginning of a receipt and stops at the end.
   3. Save one frame per receipt –the video recording contains one video frame for each operation in the receipt.
      

2. If the Beginning/end of receipt record mode is selected, enter the duration of the receipt record in seconds in the Record period field. Recording starts after receiving any events from the POS-terminal, where the beginning and end of the receipt are found between the strings (2).

   Note.

   Record will be performed permanently if the Record period is 0 sec.

3. Check the Motion detector checkbox to enable the video recording upon a motion detector alarm (3).

   Note.

   It does not make sense to enable recording upon motion detector, if the Continuous recording mode is selected.

   Warning!

   If the recording upon motion detector is enabled, uncheck the Record alarms checkbox in all cameras related to the captioners selected in this POS-terminal (see the Selecting the captioners  section). Record alarms option in cameras settings is disabled automatically when Motion detector option on the POS-terminal settings panel  is applied.

4. Check the Receipts only checkbox to include into the captioners the receipt data between the beginning and end word only (4).

   Warning!

    When the Receipts only checkbox is activated, but regular expressions of check’s beginning and end are not set, recording to the Captioner is not performed. 
5. Click Apply (5).

The video recording parameters are now set.