Configure the connection of the Siemens Cerberus ECO system to the ACFA PSIM software package

Siemens Cerberus ECO system is connected to the ACFA PSIM software package as follows:

1. Create the Cerberus ECO controller object based on the Computer object on the Hardware tab of the System settings dialog window.
   
2. Specify the following parameters on the settings panel of the Cerberus ECO controller object:
   1. Enter the Siemens Cerberus ECO controller address in the ID field (1).
      Default address – 1. The same address is to be specified in the configuration file (see the Configuring of Siemens Cerberus ECO system in the vendor software section).
      
   2. Specify the COM-port of Siemens Cerberus ECO device connection in the corresponding field (2).
3. Click the Apply button (3).
4. Click the Read configuration button (4).

As a result the system configuration will be read and objects tree will be built in the ACFA PSIM software.