Tag&Track Pro

Tag&Track Pro functionality depends on the PTZ mode that is specified in the settings (see Setting PTZ mode for Tag&Track Pro).

Attention!

You cannot use fisheye cameras.
You must enable object tracking in the Surveillance window of the overview camera for all modes of operation except for the automatic mode (see Object tracking).

If the automatic mode is selected, the PTZ camera tracks all active objects. In this case, the PTZ camera switches focus between each object with the specified switch time.
Note
The PTZ camera is positioned so that the moving object is in the center of the frame.
In the manual mode, the PTZ camera tracks an object only after the object is manually selected in the Surveillance window (left-click the track). If you click anywhere in the Surveillance window of the overview camera that contains no tracks, the PTZ camera stops object tracking and focuses on the specified point.
If control priority mode is selected, the PTZ camera automatically tracks an object until another object is manually selected for tracking in the Surveillance window. If an object is deselected (by clicking the track again) or if it leaves the PTZ camera FOV, automatic mode is re-activated.
If the PTZ camera is in the manual mode, the operator can control the PTZ device at any time. If the operator doesn't control the PTZ camera (The PTZ Control Panel hidden), then the automatic mode is used.

Note

Tag&Track Pro cannot be used with the OnScreen PTZ mode simultaneously (see Controlling a PTZ camera in the OnScreen PTZ mode).

Page tree