Documentation for Axxon One 2.0. Documentation for other versions of Axxon One is available too.

Previous page Tag&Track Pro  Simultaneous operation of Tag&Track Pro and Tag&Track Lite Next page

Configuring Tag&Track Lite

Tag&Track Lite in the Archive mode


Attention!

  • For Tag&Track Lite to work, you must enable object tracking in the Surveillance window (see Object tracking).
  • You cannot use fisheye cameras.

Tag&Track Lite works as follows:

  1. Select an object by left-clicking its track (the object is outlined with a white border).
  2. After the selected object leaves the camera FOV, the camera location on the map and object track are used to predict the camera, in the FOV of which the object is likely to appear.

  3. The Surveillance window of that camera is activated. If the current layout does not contain that camera, a minimal layout with the camera is displayed.

    Note.

    • If the Surveillance window of that camera is currently in the Archive mode, the window is switched to the Live mode and made active.
    • If video in the Surveillance window of the original camera is zoomed in and the found camera is in the layout, the Surveillance window of the camera is made active and the same degree of digital zoom is applied.

    Attention!

    Tag&Track Lite merely predicts, and therefore cannot guarantee, that the object appears in the camera FOV.

  4. To continue tracking the object, select it again in the window of the camera that opens.

  • No labels