Installing from repository

Installation from the repository is performed automatically, including all the system components.

To install from the repository, do the following:

1. Sequentially run the commands:

   echo 'deb http://download.axxonsoft.com/debian-repository stable main' | sudo tee -a /etc/apt/sources.list.d/axxonsoft.list
   echo 'deb http://download.axxonsoft.com/debian-repository stretch backports/main' | sudo tee -a /etc/apt/sources.list.d/axxonsoft.list
   wget --quiet -O - "http://download.axxonsoft.com/debian-repository/info@axxonsoft.com.gpg.key" | sudo apt-key --keyring /etc/apt/trusted.gpg.d/axxonsoft.gpg add - && sudo apt-get update

   Attention!

   If you install Axxon One on AstraLinux SE, then instead of commands from step 1, you should sequentially run the following commands:

   echo 'deb http://download.axxonsoft.com/debian-repository stretch main backports/astra backports/main' | sudo tee -a /etc/apt/sources.list.d/axxonsoft.list
     
   wget --quiet -O - "http://download.axxonsoft.com/debian-repository/info@axxonsoft.com.gpg.key" | apt-key --keyring /etc/apt/trusted.gpg.d/axxonsoft.gpg add - && sudo apt-get update

   
   

   Note

   If the distribution packages based on Debian 10 are used, it may be necessary to install additional packages:

   apt-get install wget
   apt-get install gnupg

2. To install Axxon One Server, run the following command:

   sudo apt install axxon-one

   To install the FailOver Server, run the following command:

   sudo apt install axxon-one-raft

   Attention!

   It is not allowed to simultaneously install the regular Server and the FailOver Server.

   
   During the installation, the installer will request the name of the Axxon-domain for the Axxon One server. If you leave this field blank, you can specify it on the Client at the first connection.