Installing the Axxon One Client on Linux OS

To install the Axxon One Client on Linux OS, do the following:

1. For the automatic installation from the repository:

   1. Add the repositories by sequentially running the following commands:

      echo 'deb http://download.axxonsoft.com/debian-repository stable main' | sudo tee -a /etc/apt/sources.list.d/axxonsoft.list
      echo 'deb http://download.axxonsoft.com/debian-repository stretch backports/main' | sudo tee -a /etc/apt/sources.list.d/axxonsoft.list
      wget --quiet -O - "http://download.axxonsoft.com/debian-repository/info@axxonsoft.com.gpg.key" | sudo apt-key --keyring /etc/apt/trusted.gpg.d/axxonsoft.gpg add - && sudo apt-get update

      Attention!

      If you install Axxon One on AstraLinux SE 1.6, then instead of the commands from the step 1, you should sequentially run the following commands:

      echo 'deb http://download.axxonsoft.com/debian-repository stretch main backports/astra backports/main' | sudo tee -a /etc/apt/sources.list.d/axxonsoft.list
        
      wget --quiet -O - "http://download.axxonsoft.com/debian-repository/info@axxonsoft.com.gpg.key" | apt-key --keyring /etc/apt/trusted.gpg.d/axxonsoft.gpg add - && sudo apt-get update

   2. If you use Ubuntu 20.04 or Debian 11, then install the mono-complete from the stretch repository:

      apt purge "mono-*" "libmono-*"
      apt autoremove
      apt-get update
      apt-get install mono-complete -t stretch

   3. Run the command:

      sudo apt-get install axxon-one-client

   4. During installation, it will be necessary to specify the maximum size of the log files in megabytes and the log level.
      
      

      Note

      The specified value can be changed (see Configuring the Axxon One Client logging parameters on Linux OS). To do this, run the command:

      sudo dpkg-reconfigure axxon-one-client

2. For the manual installation:
   1. Go to the downloaded deb-packages folder.

   2. Run the following commands:

      sudo dpkg -i axxon-one-client-bin_1.0.4.25_amd64.deb
      sudo dpkg -i axxon-one-client_1.0.4.25_all.deb

      where 1.0.4.25 is the version and the build number.

When the installation is complete, the Client icon will be displayed in the application menu.

By default, at the first Client start, the OS interface language will be used. To change the language of the Client interface at the first start, do the following:

1. Run the following command.

   sudo dpkg-reconfigure axxon-one-client

2. Select the required language.
   

   Note

   This setting should be configured for each OS user separately.

   Attention!

   For the next launches the interface language can be changed in the Client settings (see Selecting the interface language).