Documentation for Axxon One 1.0.

Previous page Next page

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Current »

Get unique identifier

(UUID) is generated for every GET request to http://IP-Address:port/prefix/uuid.

Unique identifier is used to get in last frame info from archive video or to control archived stream.

Response sample:

{
  "uuid": "2736652d-af5f-4107-a772-a9d78dfaa27e"
}

Servers


List of Axxon domain Servers

GET http://IP-address:port/prefix/hosts/

Sample request:

GET http://127.0.0.1:80/hosts/

Sample response:

[
	"SERVER1",
	"SERVER2"
]

Server info

GET http://IP-address:port/prefix/hosts/{NODENAME}

{NODENAME} − Server or node name on which you need to get the information.

Sample request:

GET http://127.0.0.1:80/hosts/NODE2

Sample response:

{
    "nodeName": "NODE2",
    "domainInfo": {
        "domainName": "c79912ff-bb42-431c-9b2e-3adb14966f43",
        "domainFriendlyName": "Default"
    },
    "platformInfo": {
        "hostName": "SERVER2",
        "machine": "x64 6",
        "os": "Win32"
    },
    "licenseStatus": "OK",
    "timeZone": 240,
    "nodes": [
        "NODE1",
        "NODE2"
    ]
}
ParameterDescription
nodeNameServer/node name
domainNameAxxon domain ID
domainFriendlyNameAxxon domain name
hostNameHost name
machineServer architecture
osOS
licenseStatusLicense type
timeZoneTime zone in minutes (in this example, GMT+4)
nodesList of nodes of Axxon domain

GET http://IP-address:port/prefix/statistics/hardware – get information about usage of network and CP of a specific Server.

GET http://IP-address:port/prefix/statistics/hardware/domain – get information about usage of network and CP of all Servers within Axxon Domain.

Sample request:

GET http://127.0.0.1:80/statistics/hardware

Sample response:

[
  {
    "drives": [
      {
        "capacity": 523920994304,
        "freeSpace": 203887943680,
        "name": "C:\\"
      },
      {
        "capacity": 475912990720,
        "freeSpace": 148696813568,
        "name": "D:\\"
      },
      {
        "capacity": 0,
        "freeSpace": 0,
        "name": "E:\\"
      }
    ],
    "name": "SERVER1",
    "netMaxUsage": "0,0062719999999999998",
    "totalCPU": "16,978111368301985"
  }
]
GET http://IP-adress:port/prefix/product/version

Sample request:

GET http://127.0.0.1:80/product/version

Sample response:

{
"version": "Axxon One 1.0.2.25"
}
GET http://IP-Address:port/prefix/statistics/webserver

Request example:

GET http://127.0.0.1:80/statistics/webserver

Response example:

{
  "now": "20200601T115707.888290",
  "requests": 3,
  "requestsPerSecond": 0,
  "bytesOut": 134,
  "bytesOutPerSecond": 0,
  "streams": 0,
  "uptime": 349290
}

Cameras


GET http://IP Address:port/prefix/camera/list − get all available original sources (cameras) of Axxon-domain. 

The returned VIDEOSOURCEID identifiers will have the format as follows "HOSTNAME/ObjectType.Id/Endpoint.Name". Friendly name and other related meta data will also be received.

ParameterRequiredDescription
limitNoDetermines the maximum number of returned results, the default value is 1000.
next_pageNoThe value of the nextPageToken parameter, which will be in the response if the request returns not all the results. It is used to get the following values.
filterNo

Allows getting a subset of the results in accordance with the filter. Currently it can have the HOSTNAME or VIDEOSOURCEID values.

Attention!

If Office is specified as the Server name, then the GET http://IP-address:port/prefix/camera/list?filter=Office request will receive all video cameras of Office Server.

group_idsNo

List of the group identifiers to which the cameras should belong (see Get list of groups and their contents). It is possible to specify several identifiers using the separator "|". For example:

http://localhost:80/camera/list?group_ids=6af92229-43ff-0347-9dae-081bf9835733|b48111eb-64c5-294c-a69c-4adb07c954d1

In this case, the response will contain all the cameras that belong at least to one of the specified groups.

Sample request:

GET http://127.0.0.1:80/camera/list?filter=Server1

Sample response:

{
    "cameras": [
        {
            "archives": [
                {
                    "accessPoint": "hosts/Server1/DeviceIpint.1/SourceEndpoint.video:0:0",
                    "default": true,
                    "isEmbedded": false,
                    "storage": "hosts/Server1/MultimediaStorage.AliceBlue/MultimediaStorage",
                    "storageDisplayName": "AliceBlue"
                }
            ],
            "audioStreams": [
                {
                    "accessPoint": "hosts/Server1/DeviceIpint.1/SourceEndpoint.audio:0",
                    "isActivated": false
                }
            ],
            "azimuth": "0,000000",
            "comment": "",
            "detectors": [
                {
                    "accessPoint": "hosts/Server1/AVDetector.1/EventSupplier",
                    "displayName": "Motion detection",
                    "events": [
                        "MotionDetected",
                        "MotionMask",
                        "TargetList"
                    ],
                    "parentDetector": "",
                    "type": "unknown"
                }
            ],
            "displayId": "1",
            "displayName": "Camera 1",
            "groups": [
                "e2f20843-7ce5-d04c-8a4f-826e8b16d39c"
            ],
            "ipAddress": "0.0.0.0",
            "isActivated": true,
            "latitude": "0,000000",
            "longitude": "0,000000",
            "model": "Virtual several streams",
            "offlineDetectors": [],
            "ptzs": [],
            "textSources": [],
            "vendor": "AxxonSoft",
            "videoStreams": [
                {
                    "accessPoint": "hosts/Server1/DeviceIpint.1/SourceEndpoint.video:0:0"
                },
                {
                    "accessPoint": "hosts/Server1/DeviceIpint.1/SourceEndpoint.video:0:1"
                }
            ]
        },
        {
ParameterDescription
archives

List of archives to which the camera is connected.

audioStreams

Audio stream.

commentCommentary.
detectorsList of created detection tools.
displayIdFriendly name.
displayNameName.
groups

List of groups to which the camera belongs.

ipAddressIP Address.
isActivated

True − the object is enabled, False − the object is disabled.

azimuth, latitude, longitude

The coordinates of the camera. Depending on the Server localization, the parameter values can be separated by either a period or a comma.

modelModel.
ptzs

PTZ devices where:

is_active – indicates whether the PTZ object is activated,

pointMove – Point&Click support,

areaZoom – Areazoom support.

textSourcesEvent sources.
vendorVendor.
videoStreamsVideo streams.

General case:

  • GET http://IP-Address:port/prefix/live/media/SERVER1/DeviceIpint.3/SourceEndpoint.video:0:0?w=1600&h=0 – high quality stream.
  • GET http://IP-Address:port/prefix/live/media/SERVER1/DeviceIpint.3/SourceEndpoint.video:0:1?w=1600&h=0 – low quality stream.

RTSP:

  • GET rtsp://login:password@IP-Address:554/hosts/SERVER1/DeviceIpint.3/SourceEndpoint.video:0:0 – high quality stream.
  • GET rtsp://login:password@IP-Address:554/hosts/SERVER1/DeviceIpint.3/SourceEndpoint.video:0:1 – low quality stream.

Tunneling RTSP over HTTP:

  • GET rtsp://login:password@IP-Address:80/rtspproxy/hosts/SERVER1/DeviceIpint.3/SourceEndpoint.video:0:0 – high quality stream.
  • GET rtsp://login:password@IP-Address:80/rtspproxy/hosts/SERVER1/DeviceIpint.3/SourceEndpoint.video:0:1 – low quality stream.

To configure tunneling in VLC set the Tunnel RTSP and RTP over HTTP checkbox (1) checked and specify the Web-Server port (2, see Configuring the Web-Server).

GET http://IP-Address:port/prefix/live/media/snapshot/{VIDEOSOURCEID}

{VIDEOSOURCEID} – three-component source endpoint ID (see Get list of video cameras and information about them). For instance, "SERVER1/DeviceIpint.3/SourceEndpoint.video:0:0".

ParameterRequiredDescription

w

h

No

w – frame width, h – frame height.

Note

If h and w values are more than size of original frame, the frame will be received with original size.

Zooming out of width and height is available only discretely – in 2, 4, 8 times, etc. If specified sizes are not corresponding to 1/2, 1/4 etc. of original frame size, the frame will be received with size divisible by the original frame size close to specified values.

crop_x

crop_y

crop_width

crop_height


No

crop_x – horizontal indent from the upper left corner. Possible values are 0 to 1. The default is 0.

crop_y – vertical indent from the upper left corner. Possible values are 0 to 1. The default is 0.

crop_width – the ratio of the original image width. Possible values are 0 to 1. The default is 1.

crop_height – the ratio of the original image hight. Possible values are 0 to 1. The default is 1.

Note

By default, the snapshot update period is 30 seconds. To change this value, create the NGP_SNAPSHOT_TIMEOUT system variable and set the required value in milliseconds (see Appendix 10. Creating system variable).

Sample request:

To get a snapshot in the original resolution: GET http://IP-Address:port/prefix/live/media/snapshot/Server1/DeviceIpint.23/SourceEndpoint.video:0:0.

To get a snapshot in 640*480 resolution: GET http://IP-Address:port/prefix/live/media/snapshot/Server1/DeviceIpint.23/SourceEndpoint.video:0:0?w=640&h=480.

To get the right lower particle of a snapshot: GET http://IP-Address:port/prefix/live/media/snapshot/Server1/DeviceIpint.23/SourceEndpoint.video:0:0?crop_x=0.5&crop_y=0.5&crop_width=0.5&crop_height=0.5.

To get the right lower particle of a snapshot in 640*480 resolution: GET http://IP-Address:port/prefix/live/media/snapshot/Server1/DeviceIpint.23/SourceEndpoint.video:0:0?w=640&h=480&crop_x=0.5&crop_y=0.5&crop_width=0.5&crop_height=0.5.

Get list of all available groups

GET http://IP-Address:port/prefix/group

Sample request:

GET http://127.0.0.1:80/group

Sample response:

{
   "groups" : [
      {
         "Brief" : "Group1",
         "Description" : "",
         "Id" : "35fc84a0-2280-4b30-acd2-cc8419a2dc68",
		 "groups" : [
            {
               "Brief" : "Group2",
               "Description" : "",
               "Id" : "dac24803-313c-43ab-aa9a-276922a55cb6",
			   "groups" : []
            },
            {
               "Brief" : "Group3",
               "Description" : "",
               "Id" : "13764152-6910-44b6-99b5-f74641ad4a14",
			   "groups" : [
                  {
                     "Brief" : "Group4",
                     "Description" : "Group4",
                     "Id" : "9a64e2a0-eb92-4adc-bc4f-81d30ceb6c2f",
					 "groups" : []
                  }
               ]
            }
         ]
      }
   ]
}

Get group contents

GET http://IP-Address:port/prefix/group/{GROUPID}.

GROUPID – value of the Id field received using the previous request.

Sample request:

GET http://127.0.0.1:80/group/9a64e2a0-eb92-4adc-bc4f-81d30ceb6c2f

Sample response:

{
   "members" : [ "hosts/SERVER1/DeviceIpint.1/SourceEndpoint.video:0:0" ]
}

Get list of groups containing specified camera

GET http://IP-Address:port/prefix/group/contains/{VIDEOSOURCEID}

{VIDEOSOURCEID} – three-component source endpoint ID (see Get list of video cameras and information about them). For instance, "SERVER1/DeviceIpint.3/SourceEndpoint.video:0:0".

Sample request:

GET http://127.0.0.1:80/group/contains/SERVER1/DeviceIpint.1/SourceEndpoint.video:0:0

Sample response:

{
   "groups" : [
      "35fc84a0-2280-4b30-acd2-cc8419a2dc68",
      "13764152-6910-44b6-99b5-f74641ad4a14",
      "dac24803-313c-43ab-aa9a-276922a55cb6"
   ]
}
GET http://IP-Address:port/prefix/statistics/{VIDEOSOURCEID} − statistics for the certain camera.

{VIDEOSOURCEID} − three-component source endpoint ID (see Get list of video cameras and information about them). For instance, "SERVER1/DeviceIpint.3/SourceEndpoint.video:0:0".

Statistics for the several cameras: POST http://IP-Address:port/prefix/statistics/ + request body in the following format:

[ 
    "hosts/SERVER1/DeviceIpint.1/SourceEndpoint.video:0:0",
    "hosts/SERVER1/DeviceIpint.2/SourceEndpoint.video:0:0"
]
ParameterRequiredDescription
waterlevelNo

waterlevel = 1 − the response will contain the current water level value, if the water level detection is created for the camera (see Configuring Water level detection).

Request example:

GET http://127.0.0.1:80/statistics/Server1/DeviceIpint.1/SourceEndpoint.video:0:0

Response example:

{
  "bitrate": 592831,
  "fps": 2.278942490e+01,
  "width": 1280,
  "height": 720,
  "mediaType": 2,
  "streamType": 877088845
}
Content

  • No labels
Error formatting macro: children: java.lang.NullPointerException