Bulk creation of IP devices

You can add IP devices in bulk by importing their parameters from a CSV file.

Do the following:

1. Create a CSV file with devices listed as follows:

   IP address, Port, Vendor, Model, Login, Password, Identifier, Object name, Latitude, Longitude, Azimuth, Archive name, Recording mode

   Attention!

   For each added camera, three parameters are required: IP address, Vendor and Model.

   If a required parameter is not specified, it will be automatically set to its default value. 

   You should include commas even if no additional parameters are set.

   Note

   To separate the integer and fractional parts in coordinates, use a point.

   For example:

   10.0.12.245, 80, Bosch, Dinion IP starlight 8000 MP, service, Admin12345!, 1441, Camera 1, 0, 0, 0, Archive AliceBlue, Always
   10.0.12.246,, Bosch, Dinion IP starlight 8000 MP,,,,,,,,,
   10.0.12.247, 80, Bosch, Dinion IP starlight 8000 MP,,,, Camera 3,,, Archive AliceBlue, On motion

   Attention!

   The vendor and model of the device must be specified exactly as in the list of supported devices.

   Note

   For correct display of the object name in Axxon One VMS, the CSV file must be UTF-8 or UTF-32 encoded.

2. Drag & drop the created file to the field in IP Device Discovery Wizard in Axxon One.
   

The devices will be added to the configuration.