Installing from repository

Installation from the repository is performed automatically, including all the system components.

To install from the repository, do the following:

1. Sequentially run the commands:

   echo 'deb http://download.axxonsoft.com/debian-repository stretch main backports/main' | sudo tee -a /etc/apt/sources.list.d/axxonsoft.list 
   echo 'deb http://download.axxonsoft.com/debian-repository weekly main backports/main' | sudo tee -a /etc/apt/sources.list.d/axxonsoft.list
   wget --quiet -O - "http://download.axxonsoft.com/debian-repository/info@axxonsoft.com.gpg.key" | apt-key --keyring /etc/apt/trusted.gpg.d/axxonsoft.gpg add -
   apt-get update

   Attention!

   If you install Axxon One on AstraLinux SE, then instead of commands from step 1, you should sequentially run the following commands:

   echo 'deb http://download.axxonsoft.com/debian-repository stretch main backports/astra backports/main' | sudo tee -a /etc/apt/sources.list.d/axxonsoft.list 
   wget --quiet -O - "http://download.axxonsoft.com/debian-repository/info@axxonsoft.com.gpg.key" | apt-key --keyring /etc/apt/trusted.gpg.d/axxonsoft.gpg add -
   apt-get update

   Note

   If the distribution packages based on Debian 10 are used, it may be necessary to install additional packages:

   sudo apt-get install wget
   sudo apt-get install gnupg

2. To install Axxon One Server, run the following command:

   sudo apt install axxon-one

   To install the FailOver Server, run the following command:

   sudo apt install axxon-one-raft

   Attention!

   It is not allowed to simultaneously install the regular Server and the FailOver Server.

   During the installation, the installer will request the name of the domain for the Axxon One Server. If you leave this field blank, you can specify it on the Client at the first connection.