Documentation for Axxonsoft Platform Calculator. Documentation for other products available here.
Previous page Next page
The cameras used in the video surveillance system are selected in the group of IP camera parameters and selection of the required functionality.
The cameras are grouped by parameters. To add a camera group to the calculation, click the Add a group of cameras button.
The Platform Calculator allows you to calculate the platform taking into account different streams for viewing video, transmitting to remote clients, and recording to the archive. By default, when you add a camera group, two streams are specified, and their purpose differs depending on the selected type of calculation (see the table below). To add additional streams, click the Add a stream button.
Stream parameters
The parameters description is given in the table:
Parameter | Description | ||||||||||||
Number of cameras | The number of cameras of the selected brand, which will be used in the video surveillance system. If you set this parameter to 0, it will remove the camera group from the configuration. In this case, the camera group settings become inactive | ||||||||||||
| Brand | The list of IP camera manufacturers and video capture card models, integrated into Axxon One and Axxon PSIM. Besides the camera brand names, this list contains the following values: !Onvif. Select this value if you plan to use a camera that uses the ONVIF protocol. !RTSP. Select this value if you plan to use a camera that transmits video via the RTSP protocol. !Undecided. Select this value if you do not know which camera model will be used | ||||||||||||
Activity | An approximate estimate of the amount of motion in the camera field of view. Available values: Extremely Low, Low, Medium, High. Note 1. If you use the VMDA detection tools, then consider the following guidelines: if a video camera is installed in a place where, on average, 3 objects will be simultaneously present in the frame, then select the High value. If on average there will be 2 objects simultaneously present in the frame, then select the Medium value. If on average there will be only 1 object in the frame, select the Low value. If the frame will be mostly static, select the Extremely Low value. Note 2. In other cases, a scene with 30% changes in the frame and a medium number of moving small details is considered a medium activity. A scene with more than 70% changes in the frame and a large number of moving small details is considered a high activity | ||||||||||||
| Resolution | The video resolution. The list of available resolutions depends on the selected manufacturer or video capture card model | ||||||||||||
FPS | The frame rate of the video stream. The range of frame rates depends on the selected manufacturer or video capture card model | ||||||||||||
Codec | The compressor used by the camera or video capture card to compress the video stream. The availability of certain compressors in the list depends on the selected manufacturer or video capture card model | ||||||||||||
| Bitrate | The stream in Mbps from one camera of the specified type. By default, the stream is calculated based on the constant bitrate (CBR) recommended for the given resolution (for the H264 codec). For other codecs, the default stream is calculated based on the average data obtained as a result of camera testing by the AxxonSoft QA. If the calculated stream does not reflect the actual situation, you can specify the stream from one camera manually. To ensure an accurate calculation, use the camera manufacturer's calculator. See the list of known calculators in the Vendor’s calculator drop-down list | ||||||||||||
| Stream purpose | The group of switches for selecting the stream purpose. The available values depend on the selected type of calculation—see Selecting the type of calculation
| ||||||||||||
| Detection tool | See Types of detection tools |
Options of the Platform Calculator when selecting cameras
- To change the name of a camera group, left-click it, enter a new name, click ✓:
To copy a group, click the
icon next to the group name. A new group with a similar name and settings will be added to the end of the camera group list.- To delete a stream, click the trash can
icon in the stream title. Note that at least one stream must be specified for a camera group. - To delete a camera group, click the trash can
icon next to the group name. - To delete all added configurations, click the Clear all button.
The default FPS
When adding a new camera group, the default FPS depends on the location: 30 FPS for the USA, 25 FPS for other countries.
You can change this value:
- Go to Settings, the link in the top right corner.
- Select 25 FPS or 30 FPS for FPS on adding new camera group.
- Click the Save button.
