Go to documentation repository
Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.
Previous page Next page
The VMS object corresponds to the Voice Message Service system object.
Operator format to describe actions with the voice message service is:
DoReact("VMS","_id_","_command_" [,"_parameters_"]);
List of commands and parameters for the VMS object is presented in the following table:
Command – command description | Parameters | Description of parameters |
"SEND" – send message. | modem<> | Name of device. |
pulse<> | Type of dialing (0 – tonal, 1 – pulse). | |
name<> | Object name. | |
redial_attempts<> | Number of call attempts. | |
redial_delay<> | Pause between call attempts. | |
waitfordialtone<> | Waiting for line signal (0 - no, 1 – yes). | |
flags<> | Flags. |
Properties of the VMS object are shown in the table.
Properties of the VMS object | Description of properties |
ID<> | Object ID. |
PARENT_ID<> | Parent object ID. |
Examples of using events and reactions of the Voice Message service object:
It is required to send message while performing macro 1 if modem is connected to COM2 port, type of dialing is tonal, do not wait for tonal signal.
OnEvent("MACRO","1","RUN") { DoReact("VMS","1","SEND","modem<2>,pulse<1>,waitfordialtone<0>"); }
Overview
Content Tools