Go to documentation repository
Cut borders mode is designed for more detailed video images adjustment. Cutting the borders is performed by the set number of pixels, calculated from the image borders. The area, left after cutting the borders, will be increased up to initial image sizes.
Select the video image that has to be cut and click Cut borders button on the control panel to activate the Cut borders mode.
The panel of setting the sizes of image area that has to be cut will be displayed. In the fields of this panel there is set the width of image area that has to be cut in pixels. Every field corresponds to one of the image borders: upper field –upper border, right field – right border e.t.c.
Click OK button in the bottom part of the panel after setting the width of image area that has to be cut.
Note.
If Accept button has been pressed after setting the width of image area that has to be cut one can return to initial image sizes only by zeroizing the set cut borders and clicking OK button.
Note.
The maximum cut of each border of the selected video image is equal to 15 pixels.
Overview
Content Tools