Go to documentation repository
Documentation for Axxon One 2.0. Documentation for other versions of Axxon One is available too.
Previous page Next page
To configure the People counter, do the following:
- Create Pose Detection (see Configuring Pose Detection).
- Below the Pose Detection, click Create… → People counter.
People counter counts the number of people in the specified area using the metadata of the Pose Detection.
A trigger, on the basis of which a macro can be started (see Configuring start conditions for event-driven macros), can be generated if the number of people in the frame meets the specified conditions.
Note
- Unlike the Multiple Objects detection tool (see Settings specific to Multiple objects), the counter generates events of just one type—triggering.
- Unlike the Neurocounter (see Configuring Neurocounter), People counter counts only people.
If necessary, you can change the detection tool parameters. The list of parameters is given in the table:
| Parameter | Value | Description |
|---|---|---|
| Object features | ||
| Record mask to archive | Yes | Mask is recorded to the archive by default. To disable the parameter, select the No value |
| No | ||
| Other | ||
| Enable | Yes | The detection tool is enabled by default. To disable the detection tool, select the No value |
| No | ||
| Name | People counter | Enter the detection tool name or leave the default name |
| Type | People counter | Name of the detection tool type (non-editable field) |
| Basic settings | ||
| Alarm when value | In range | Specify when the detection tool must trigger: when the number of people in the specified area is within the set range, or out of the range |
| Out of range | ||
| End value of alarm range settings | 100 | Specify the range of the number of people in the frame. The value must be in the range [0, 100] |
| Event interval | 1 | Specify the interval in seconds between two consecutive triggerings of the detection tool when the number of people in the frame continuously meets the specified conditions. The value must be in the range [1, 10000] |
| Number of measurements in a row to trigger detection | Specify the minimum number of frames with the set number of people for the detection tool to trigger. The value must be in the range [1, 20]. | |
| Start value of alarm range settings | 5 | Specify the range of the number of people in the frame. The value must be in the range [0, 100] |
In the preview window, you can specify the areas for detection using the anchor points 
(see Configuring the Detection Zone). By default, the entire frame is the area for detection.
Note
- For convenience of configuration, you can "freeze" the frame. Click the
button. To cancel the action, click this button again. - The area for detection is displayed by default. To hide it, click the
button. To cancel the action, click this button again.
To save the parameters of the detection tool, click the Apply 
button. To cancel the changes, click the Cancel 
button.
In the Surveillance window on the layout next to the counter icon, you can add text and the number of people counted by the detection tool (see Displaying the number of detected objects).
Overview
Content Tools