Local AxxonData Reports subsystem in Linux OS

AxxonData is a local version of AxxonNet cloud service. AxxonData is compatible with Axxon One version 1.0.4 and with the Axxon Next archive product.

Minimum requirements for installing and running AxxonData

To run AxxonData, it is recommended to use a computer with a 1.0 GHz processor with two or more cores and 2 GB RAM.

Disk subsystem requirements: 4 GB to install AxxonData and at a rate of 1 MB = 1000 events to store the events from the detection tools in the database.

Docker installation

To install the latest version of Docker from the official repository, do the following:

1. Update the current package list.

   sudo apt update

2. Install the packages that allow APT to use HTTPS.

   sudo apt install apt-transport-https ca-certificates curl software-properties-common

3. Add the CFG key of the official Docker repository to the system.

   curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -

   Note

   When installing on Debian 11, this command will look like this:

   curl -fsSL https://download.docker.com/linux/debian/gpg | sudo apt-key add -

4. Add the Docker repository to the APT package sources list.
   

   sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu bionic stable"

   Note

   When installing on Debian 11, this command will look like this:

   sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/debian stretch stable"

5. Update the current package list including the Docker packages from the added repository.
   

   sudo apt update

6. Make sure the installation is performed from the Docker repository.
   

   apt-cache policy docker-ce

   Response example:
   

   docker-ce:
     Installed: (none)
     Candidate: 18.03.1~ce~3-0~ubuntu
     Version table:
        18.03.1~ce~3-0~ubuntu 500
           500 https://download.docker.com/linux/ubuntu bionic/stable amd64 Packages

7. Install the Docker.
   

   sudo apt install docker-ce

8. Make sure the Docker is running.
   

   sudo systemctl status docker

   The response should contain the active (running) status:
   

   docker.service - Docker Application Container Engine
      Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled)
      Active: active (running) since Thu 2018-07-05 15:08:39 UTC; 2min 55s ago
        Docs: https://docs.docker.com
    Main PID: 10096 (dockerd)
       Tasks: 16
      CGroup: /system.slice/docker.service
              ├─10096 /usr/bin/dockerd -H fd://
              └─10113 docker-containerd --config /var/run/docker/containerd/containerd.toml

AxxonData installation

To install AxxonData, do the following:

1. Download the distribution archive from the AxxonSoft website and unpack it into any folder.

2. The default access protocol is HTTPS, which requires manual installation of certificates on client computers in local cloud. If it is necessary to switch to HTTP, run the following command:
   

   sudo ./http_https_switcher.sh HTTP

   HTTP is an insecure protocol that does not require a certificate to be installed. To switch back to HTTPS, run the following command:
   

   sudo ./http_https_switcher.sh HTTPS

3. In the terminal, execute the command to grant execution rights to the scripts (load.sh, once.sh, run.sh, stop.sh).

   sudo chmod +x *.sh

4. Run the once.sh script.

   sudo ./once.sh

5. Run the load.sh script.

   sudo ./load.sh

6. Create the Docker services.

   sudo ./run.sh

7. Check the services status.

   sudo docker service ls

   In the REPLICAS column, all values should be displayed as 1/1.
   

8. You can change the default vmscloud.local domain alias from the /etc/hosts file.

9. Install the root certificate. The certificate should be in PEM format with a .crt extension.
   

   sudo mkdir /usr/share/ca-certificates/extra
   sudo cp rootCA.pem /usr/share/ca-certificates/extra/rootCA.crt
   sudo dpkg-reconfigure ca-certificates

   If you use Firefox, then you should add the rootCA certificate to the Firefox Certificates yourself.

10. Change the AxxonData address in the Axxon One configuration:

    1. Stop the Server.
    2. In the infra.dictionar file, replace the address of the CLOUD_URL parameter with vmscloud.local. If the Axxon One Server is installed on Linux, the file will be located in the /opt/AxxonSoft/AxxonOne/Dictionary.local directory. If Axxon One Server is installed on Windows, the file will be located in the C:\Program Files\AxxonSoft\AxxonOne\Dictionary.local directory. 
       
    3. Start the Server.
11. On the Axxon One Server, enter the address of the computer on which AxxonData is installed in the hosts file (C:\Windows\System32\drivers\etc or /etc/hosts). For example, 192.168.11.12 vmscloud.local. If AxxonData is installed on the same computer with the Axxon One Server, you can skip this step.

AxxonData will be available at vmscloud.local. By default, 2 test users are available:

1. Admin1/admin1password.
2. Admin2/admin2password.

Updating the data communication protocol on the previously installed AxxonData

To change the data communication protocol on a previously installed local cloud, do the following:

1. Stop the local cloud:
   

   sudo  ./stop.sh

2. Change the protocol:
   

   sudo ./http_https_switcher.sh HTTP # change https to http
   sudo ./http_https_switcher.sh HTTPS # change http to https

3. Load the changes:
   

   sudo  ./load.sh

4. Run the local cloud:
   

   sudo  ./run.sh

5. Check the availability of the cloud:
   

   sudo docker service ls

In the REPLICAS column, all values should be displayed as 1/1.