Documentation for Axxon One 2.0. Documentation for other versions of Axxon One is [available too].

Previous page Next page

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Attention!

  • The stable operation of the Client is not guaranteed on Ubuntu 18 and 19. We recommend installing only the Axxon One Server (see Linux OS에 Axxon One 서버 설치). Both the Client and the Axxon One Server are supported on Ubuntu 20 and newer versions.
  • Both the Client and the Server must be of the same version (see Linux OS에 Axxon One 서버 설치).

To install the Axxon One Client in Linux OS, do the following:

  1. Install the Axxon One Server (see 저장소에서 설치, 수동 설치).

  2. If you use Ubuntu 20.04, Debian 11 or above, then install the mono-complete from the stretch repository:

    sudo apt-get install mono-complete -t stretch
  3. Contact AxxonSoft and get the necessary packages for installing the Client from the AxxonSoft manager.

  4. Go to the folder with the downloaded deb packages.
  5. Run the commands:

    sudo dpkg -i axxon-one-client-bin*.deb || sudo apt-get install -f -y
    sudo dpkg -i axxon-one-client_*all.deb || sudo apt-get install -f -y
  6. During installation, it will be necessary to specify the maximum size of the log files in megabytes and the log level.

    Note

    Later you can change the specified value (see Configuring the logging parameters of the Axxon One Client in Linux OS). To do this, run the command:

    sudo dpkg-reconfigure axxon-one-client

Installation of the Axxon One in Linux OS is complete. When the installation is complete, the Client icon will be displayed in the application menu.

Attention!

  • You cannot run the Axxon One Client as a Linux user with the root rights.
  • You can authorize in the Client as any Axxon One user.

By default, at the first Client start, the OS interface language will be used. To change the language of the Client interface at the first start, do the following:

  1. Run the command:

    sudo dpkg-reconfigure axxon-one-client
  2. Select the required language:

    Attention!

    • This setting must configured for each OS user separately.
    • For the next launches the interface language can be changed in the Client settings (see 인터페이스 언어 선택).


  • No labels