Go to documentation repository
Previous page Next page
Attention!
To install the Axxon One Client in Linux OS, do the following:
If you use Ubuntu 20.04, Debian 11 or above, then install the mono-complete from the stretch repository:
sudo apt-get install mono-complete -t stretch
Contact AxxonSoft and get the necessary packages for installing the Client from the AxxonSoft manager.
Run the commands:
sudo dpkg -i axxon-one-client-bin*.deb || sudo apt-get install -f -y sudo dpkg -i axxon-one-client_*all.deb || sudo apt-get install -f -y
During installation, it will be necessary to specify the maximum size of the log files in megabytes and the log level.
Note
Later you can change the specified value (see Configuring the logging parameters of the Axxon One Client in Linux OS). To do this, run the command:
sudo dpkg-reconfigure axxon-one-client
Installation of the Axxon One in Linux OS is complete. When the installation is complete, the Client icon will be displayed in the application menu.
Attention!
By default, at the first Client start, the OS interface language will be used. To change the language of the Client interface at the first start, do the following:
Run the command:
sudo dpkg-reconfigure axxon-one-client
Select the required language:
Attention!