Configuring push notifications in the AxxonNet mobile client on Android OS

You can configure push notifications in the Notifications section.

To enable the push notifications, do the following:

Connect to the required Server (to Axxon One—only via AxxonNet, to Axxon PSIM—directly, see Connection and Server operations in AxxonNet client on Android OS).

Attention!

To receive push notifications from the Axxon One Server, do the following:

Connect this Server to AxxonNet (see https://axxonnet.com/).
To send push notifications automatically, you must configure the corresponding macro (see Push notification).

To receive push notifications from the Axxon PSIM Server, you must activate and configure receiving push notifications in Axxon PSIM (see Configuring the event filter for the Web server 2.0 module).

1. On the Profile tab, select the button in the upper right corner of the screen and subscribe to push notifications.
2. Make sure the Android device has access to all AxxonNet notifications.
In the Push notifications period parameter, select the frequency of receiving notifications. During the specified time interval, you will receive only one last notification from each camera. All previous notifications will be discarded.
- No limit;
- 10 seconds;
- 1 minute;
- 5 minutes;
- 10 minutes;
- 1 hour.
Note
After changing the notifications period, you must restart the application.
Set the Show images checkbox to display the camera images in push notifications.

Page tree