Configuring the ONVIF Server

Axxon One has a built-in ONVIF Server using which Axxon One can be added as a video recorder to other software (for example, Onvif Device Manager (ODM) or Happytimesoft).

To configure the ONVIF Server, do the following:

1. Install Axxon One 2.0 together with DriverPack 3.73.79 and later.

2. Shut down the Server (see 서버 종료).

3. Create the NGP_ONVIFSERVER_ENDPOINT system variable (see 부록 9. 시스템 변수 생성). In the Variable value field,field, specify the IP address of the local Axxon One Server.

4. Start the Server (see 서버 시작).
5. In the software (for example, Happytimesoft), add the Axxon One Server as a device using the 8081 port.
   
   

The ONVIF Server configuration is complete. The software will broadcast the video image from Axxon One in real time.

You can also add the ONVIF Server to another Axxon One Server as an ONVIF generic IP device (see IP 장치 추가 및 제거).

The ONVIF Server will be added to the configuration as an IP server (see The IP Server Object) with corresponding video cameras.