Introduction into the Guide for configuring and working with the Peridect+ (AxACFA) integration module

Purpose of the document

The Guide for configuring and working with the Peridect+ (AxACFA) integration module is a reference and information manual and is intended for configuration specialists and operators of the Peridect+ (AxACFA) module.

The Guide has the following information:

1. General information about the Peridect+ (AxACFA) integration module.
2. Configuring the Peridect+ (AxACFA) integration module.
3. Working with the Peridect+ (AxACFA) integration module.

General information about the Peridect+ (AxACFA) integration module

The Peridect+ (AxACFA) integration module is a part of ACFA PSIM and is used to monitor and control the Peridect+ PID devices. You cannot configure the Peridect+ (AxACFA) integration module in ACFA PSIM.

Before you start working with the Peridect+ (AxACFA) integration module, you must install the hardware on the protected facility and perform the initial configuration of the Peridect+ PID devices.