The settings panel of the ONVIF-Server Profile object

The ONVIF-Server Profile object is used to configure the ONVIF device channel.

The settings panel of the ONVIF-Server Profile object is shown in the figure.

The table describes the setting parameters of the ONVIF-Server Profile object.

№	Parameter	Method for setting the parameter value	Parameter description	Representation	Default value	Value range
1	Identification number*	Automatically	Displays the identification number of the ONVIF-Server Profile object in the video surveillance system with distributed architecture	Numbers, letters, periods, hyphen, dash, and underscore	NA	Depends on the number of the ONVIF-Server Profile objects in the video surveillance system with distributed architecture
2	Name*	Enter the value in the field	Sets the name of the ONVIF-Server Profile object in the video surveillance system with distributed architecture	Latin, Cyrillic, and service characters	PTZ device	A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive. Number of characters—from 1 to 60
3	Disable	Set the checkbox	Disables the ONVIF-Server Profile object in the video surveillance system with distributed architecture	Boolean type	Clear	Set—the ONVIF-Server Profile object is disabled and isn't used Clear—the ONVIF-Server Profile object is enabled and used
4	ONVIF-Server	Select the value from the list	Sets the ONVIF-Server parent object in the system with distributed architecture to which the given ONVIF-Server Profile object belongs	Names of the ONVIF-Server objects registered in the system	ONVIF-Server	Depends on the number of the ONVIF-Server objects in the video surveillance system with distributed architecture
5	Camera	Select the value from the list	Sets the Camera object that corresponds to this ONVIF-Server Profile object	Names of the Camera objects registered in the system	NA	Depends on the number of the Camera objects in the video surveillance system with distributed architecture
6	Stream	Select the value from the list	Sets the camera stream that is transmitted via the given ONVIF-Server Profile object	List of available camera streams	NA	Depends on the number of the activated camera streams
7	PTZ	Select the value from the list	Sets the PTZ object, used for the PTZ control of the camera, corresponding to the ONVIF-Server Profile object	List of PTZ objects corresponding to the selected Camera object	NA	Depends on the number of the PTZ objects created and configured in the system
8	Microphone	Select the value from the list	Sets the Microphone object corresponding to the selected Camera object	List of the Microphone objects corresponding to the selected Camera object	NA	Depends on the number of the Microphone objects created and configured in the system
9	Audio stream	Select the value from the list	Sets the audio stream to be synchronously transmitted with video signal	List of available audio streams	NA	Depends on the number of the available audio streams
10	Analytics	Select the value from the list	Sets the stream to transmit analytics	List of available streams	NA	Depends on the number of available streams
11	Metadata	Select the value from the list	Sets the stream to transmit metadata	List of available streams	NA	Depends on the number of available streams
12	Fixed	Set the checkbox	Disables deleting the ONVIF-Server Profile object using the driver	Boolean type	Clear	Set—the ONVIF-Server Profile object cannot be deleted using the driver Clear—the ONVIF-Server Profile object can be deleted using the driver
13	Multicast	Set the checkbox	Enables video transmission via the ONVIF-Server in the multicast mode	Boolean type	Clear	Set—video can be transmitted in the multicast mode. Note. There are some extra actions needed besides setting the checkbox in order to enable video transmission in the multicast mode—see Configuring getting video using ONVIF-Server module. Clear—video cannot be transmitted in the multicast mode

*Name of the element isn't displayed in the settings panel of the given object.

Page tree

Documentation for Axxon PSIM 2.0. Documentation for other versions of Axxon PSIM is available too.