Documentation for Axxon One 2.0. Documentation for other versions of Axxon One is [available too].

Previous page Next page

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

Use this action to transmit audio from the Client's microphone to the selected speaker.

Attention!

If a Client is behind the NAT, you have to specify the external IP address of the switch for this Client with a port range of at least 1000 (see 네트워크 설정 유틸리티).

To configure this action, do as follows:

  1. Configure the conditions to start a macro (see Configuring filters for event-driven macros).
  2. Select a speaker (1).
  3. Select a microphone (2).
  4. Specify sensitivity from 0 to 100 (3).

To stop sound, use the Stop voice notification from client command on the Client.

To configure this command, select a speaker (4) and a microphone (5). 

  • No labels
Error formatting macro: children: java.lang.NullPointerException