Documentation for Axxon Next 3.1.1. Documentation for other versions of Axxon Next is [available too].

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

To configure switching to a PTZ camera preset, you must perform the following steps:

  1. Select the Go to preset check box (1).
  2. In the PTZ list (2) select a Telemetry object that matches the PTZ device of the PTZ video camera. The pan/tilt unit of any PTZ camera can be used, including one tied to another server (if it is enabled).
  3. In the Preset number list (3), select the number of the camera preset to which the camera should switch when the detection tool is triggered.
  4. Go to another automatic rule, or click Apply.

Configuration of switching to a PTZ camera preset is now complete.

  • No labels