Documentation for Axxon Next 3.1.1. Documentation for other versions of Axxon Next is [available too].

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

If a relay is part of an IP server, then you must specify the video camera to which it will be linked in the settings of the given relay. When you do this, the Relay object will appear under the specified Camera object in the object tree. Afterwards the video camera selection will be also available.

Note

This setting is relevant only for relays connected to IP servers. The relay and the video camera to which it is to be linked must be connected to the same IP server

In all other cases the Relay object will automatically be displayed in the objects tree as a child of the video camera itself.
To configure a Relay object, perform the following:

  1. Select a Relay object in the objects tree.
  2. Enable the device (1).
  3. Enter the name of the relay (2).
  4. Set the status to which the relay will be set when no alarm is present.
  5. Click the Apply button.

The relay will then be switched to its assigned work mode.
To check the functioning of the relay, click the Test button. If the relay is configured correctly, its status will briefly change.

Play corresponding video

  • No labels