You can manage the door of the Axis integration module in the Map and Equipment Board interface objects using the menu of the Axis door object. To display the menu of the Axis door object, right-click the required object. Commands to manage the door of the Axis integration module are described in the table:
| Menu command | Function |
|---|---|
| Lock open | Open the lock |
| Lock down | Lock the door, the device ignores other actions until the Lock down release command is called, the door is set to the Locked state |
| Access | Give users instant access to the door, the door is set to the Accessed state |
| Unlock | Unlock the door, the door is set to the Unlocked state |
| Release | Release the door |
| Lock down release | Unlock the door by switching it from the Locked state to the previous/next state, usually the Locked down state |
| Access on time | Give a user a temporary access, which is determined by the settings |
| Lock open release | Open and unlock the door |
| Lock | Close the door, the door is usually set to the Locked state |
| Double lock | Used to securely lock the door, the door is set to the Double locked state. If the door has an additional lock, it must also be locked |
| Block | Lock the door and prevent instant access to the door, the door is set to the Blocked state |
The Axis door object of the Axis integration module can have the following states:
| Unknown |
| Locked |
| Unlocked |
| Accessed |
| Blocked |
| Locked down |
| Locked open |
| Double locked |
| Door unknown |
| Door open |
| Door closed |
| Door fault |
| Lock unknown |
| Lock locked |
| Lock unlocked |
| Lock fault |
| Doublelock unknown |
| Doublelock locked |
| Doublelock unlocked |
| Doublelock fault |
| Alarm normal |
| Door forced open |
| Door open too long |
Overview
Content Tools