Documentation for Axxon One 3.0/3.1 version. Documentation for Axxon One 2.0 version is also available.


Axxon One supports the external face recognition system FaceCube+ recognizer.

To use the FaceCube+ system, you need to contact the AxxonSoft manager and get a license file (see Types of licenses).

FaceCube+ works as follows:

  1. Axxon One recognizes a face, then sends it to FaceCube+.
  2. FaceCube+ checks the face with reference faces in its own database. 
  3. If a match is found, FaceCube+ sends the information to Axxon One (see Face recognition and search).

To configure integration with FaceCube+, do the following:

  1. Go to the Detectors tab.
  2. Click the Create... button → Create Realtime recognizer.
    If necessary, you can change the settings of the FaceCube+ that are listed in the table:
    ParameterValueDescription
    EnableYesBy default, the system is disabled. To enable it, select the Yes value
    No
    Address127.0.0.1 By default, the address of the FaceCube+ server is specified
    Login
    		If necessary, enter a username
    External real-time recognizerFaceCube+ recognizerBy default, FaceCube+ recognizer is specified
    Port10111 By default, the port on which FaceCube+ is running is specified
    Password
    		If necessary, enter the user password
    External recognizer type0 If necessary, enter the value of the external recognizer type. The default value is 0
    Minimum score0 Enter the average value of the minimum recognition threshold (for example, 75)
     
  3. To save the changes to FaceCube+ settings, click the Apply button.
  4. Go to the Detectors tab.
  5. Below the required camera, click the Create... button → Category: Face → select the required detector (see Category: Face).
  6. In the External recognition server parameter, select FaceCube+ recognizer from the drop-down list.
  7. Enable the Check in lists and Send face images parameters in the face detector settings (see Configuring the Face detector VL, Configuring the Face detector VA, Configuring the Face detector TV).
  8. To save the changes to detector settings, click the Apply button.
  9. If necessary, you can configure macros to process face recognition events (see Configuring macros when working with lists of faces).

Configuration of cooperation between Axxon One and FaceCube+ is complete.

  • No labels