Go to documentation repository
The settings panel of the Backup archive system object is shown in the figure.
The table describes the setting parameters of the Backup archive system object.
№
| Parameter | Method for setting the parameter value | Parameter description | Representation | Default value | Value range |
1 | The Identification number* | Automatically | Displays the identification number of the Backup archive system object in the video surveillance system with distributed architecture | Digits, letters, periods, hyphen, dash, and underscore | NA | Depends on the number of the Backup archive objects in the video surveillance system with distributed architecture |
2 | The Name* | Enter the value in the field | Sets the name of the Backup archive object in the video surveillance system with distributed architecture | Latin alphabet, Cyrillic, digits and service characters | Backup archive | A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive. Number of characters—from 1 to 60 |
3 | The Disable | Set the checkbox | Disables the Backup archive object in the video surveillance system with distributed architecture | Boolean type | Clear | Set—the Backup archive object is disabled and isn't used Clear—the Backup archive object is enabled and used |
4 | The Computer | Select the value from the list | Sets the Computer parent object for the backup archive | Names of the Computer objects registered in the system | Name of the Computer parent object | Depends on the number of the Computer objects in the system |
The Cameras group | ||||||
5 | The Range | Click the button | Provides access to the complex selection of video cameras for copying the video archive to the backup archive | NA | NA | NA |
6 | The All | Click the button | Selects all cameras registered in the system for copying the video archive to the backup archive | NA | NA | NA |
7 | The Number | Select the value from the list | Sets the number of the camera for copying the video archive to the backup archive | Sequence of numbers | NA | Depends on the number of cameras registered in the system |
8 | The Camera | Select the value from the list | Sets the name of the camera for copying the video archive to the backup archive | Names of the cameras registered in the system | NA | Depends on the number of cameras registered in the system |
9 | The Gate | Select the value from the list | Sets the Videogate object through which the video archive from the selected camera is transferred to the backup archive | Names of the Videogate objects registered in the system | NA | Depends on the number of the Videogate objects registered in the system |
10 | The Backup archive | Select the value from the list | Sets the Backup archive object, which transfers the video archive from the selected camera to the given backup archive | Names of the Backup archive objects registered in the system | NA | Depends on the number of Backup archive objects registered in the system |
11 | The Compression | Select the value from the list | Sets the level of the video signal compression to write to the backup archive | Sequence of numbers | NA | In order of increasing the compression level from 0 to 5 0—no compression 5—maximum compression |
12 | The Compressor | Select the value from the list | Sets the algorithm of the video stream compression used for the video signal recompression when writing to the backup archive. If you specify the compressor, select the compression value in the list | List of available algorithms | NA | MJPEG, Motion Wavelet 3.5, MPEG4 |
13 | The Edge storage drop-down list | Select the value from the list | Sets the External storage object used to import the archive from the external storage of the IP device | Names of the External storage objects registered in the system | NA | Depends on the number of the External storage objects registered in the system |
14 | The Store no more than (hours) field | Enter the value in the field | Sets the time period in hours after which the records must be deleted from the backup archive | Non-negative integer | NA | >0 |
The Record to disks group | ||||||
15 | The Video checkbox | Set the checkbox | Sets the disk to store the backup archive | Boolean type | Clear | Set—the disk is used to store the backup archive Clear—the disk isn't used to store the backup archive |
16 | The Disk field | Automatically | Displays the names of the local (network, USB) disks available for storing the backup archive | Names of the available disks (Latin characters) | NA | Depends on the total number of the available disks |
17 | The GB field | Automatically | Displays the amount of free space on each available disk | Disk space in GB | NA | Depends on the amount of free disk space |
The Baud rate table | ||||||
18 | The Computer field | Automatically | Sets the list of computers from which the archive is transferred to the backup archive | List of computers in the hardware tree | NA | Depends on the number of the Computer objects created in the system and on the list of cameras selected for transferring the archive |
19 | The kBps field | Enter the value in the field | Sets the maximum data transfer speed from this computer to the backup archive via the LAN | Speed value in kbyte/s | 100 | Depends on the bandwidth of the local network and resources of the used computers. 0—the video archive data transfer speed is unlimited |
The Settings group | ||||||
20 | The Record with checkbox | Set the checkbox | Enables the decimation of the video archive for transferring it to the backup archive | Boolean type | Clear | Set—the decimation is enabled Clear—the decimation is disabled |
The Record with | Select the value from the list | Sets the frame rate of the video archive during decimation | Frame rate in frame/s | NA | 1, 2, 3, 4, 6, 8, 12, 25 | |
21 | The Archiving period | Select the value from the list | Sets the schedule of copying the video archive to the backup archive | List of available archiving periods | Never |
|
Out of the group | ||||||
22 | The Failover service checkbox | Set the checkbox | Enables the cooperation of the Backup archive module with the failover service (see also Configuring archive synchronization of main and backup Servers) | Boolean type | Clear | Set—the Backup archive module is used to synchronize the archives of the main and backup servers in the failover mode Clear—the Backup archive module operates as usual |
*Name of the element isn't displayed in the settings panel of the given object