Configuring the position of the Incident manager window

To configure the position of the Incident manager window on the screen, do the following:

1. Go to the settings panel of the Incident manager object.
2. Set the window coordinates in one of the following ways:
    
   1. Manually:
      1. Enter the coordinates of the upper left corner: X field (horizontal offset from the left border of the screen) and Y field (vertical offset from the upper border of the screen).
         Coordinates are expressed as a percentage of the horizontal and vertical screen sizes, respectively.
      2. Specify the window dimensions: W field (window width) and H field (window height).
         Dimensions are expressed as a percentage of the horizontal and vertical screen sizes, respectively.
   2. Using a test window:
      1. Click the X button.
      2. Place the opened Specify dimensions test window where the Incident manager window must be displayed.
         
      3. Click the OK button.
         As a result, coordinates in the X, Y, W, H fields will be set in accordance with the size and position of the test window.
3. Set the Allow moving checkbox to manually change the position and size of the Incident manager window.
4. From the Monitor drop-down list, select the number of the monitor in the system for which the coordinates are set and on which the Incident manager window must be displayed.
5. Click the Apply button.

Configuring the position of the Incident manager window is complete.