Documentation for Axxon PSIM 2.0. Documentation for other versions of Axxon PSIM is available too.

Previous page Next page


The MO USBIO 4x4 module is an interface for external sensors (sensors) and external executive devices (relays) as a part of video surveillance and fire and security alarm systems.

 

External module is controlled via the USB interface. Electrical and technical specifications of the module are given in Electrical and technical specifications of MO USBIO 4x4 section.

Configure the MO USBIO 4x4 external module as follows:

  1. Connect the MO USBIO 4x4 module to the server via the USB cable included in the distribution kit. 
  2. To connect sensors and relays, unsolder the connector that is in the distribution kit. Unsoldering is made in accordance with the external connector pinout of the MO USBIO 4x4 module.  Depending on the module modification one of the jack pinout shown in figure can be in use.
  3. Fix the unsoldered connector in the casing in the distribution kit.
  4. Connect ready-for-use connector to external connector of the card in order to connect sensors and relays to the Server.

The MO USBIO 4x4 external module configuration is completed.