Configuring the root of the Satel GPRS-A integration module

To configure the root of the Satel GPRS-A integration module, do the following:

1. Go to the settings panel of the Satel GPRS-A Root object.
   
2. In the IP field, enter the IP address of the server with which the GPRS-A controllers will connect.
3. In the Port field, enter the port on which listening and communication with GPRS-A controllers will be carried out.
4. In the Path field, enter the path to the certificate. If there is no certificate, the module generates its own.
5. In the Password field, enter the password for certificate authentication if required.
6. Click the Create/show test interface button to create a map containing the controller and all I/O child objects of this controller.
7. Click the Remove test interface button to remove the created test interface if it exists.
8. From the Map type drop-down list, select the type of arrangement of objects on the test interface map. You can choose between alignment of objects in a line or in a parent-child tree.
9. In the Max number of elements in one row field, enter the maximum number of elements on the map that can be in one row.
10. Set the Notify about unknown devices checkbox to get a notification when an unknown device is detected.
11. Click the Create detected controllers button to add all detected controllers to the object tree.
12. Click the Apply button to save the settings.

Configuration of the root of the Satel GPRS-A integration module is complete.