Associating AIM input with terms

Associating AIM input with terms allows changing internal variable's term value at certain events.

Associating AIM input with terms is performed on the Apollo AIM Input object settings panel. The object is created under Apollo AIM Reader.

Associating AIM input with a term is performed as follows:

1. Go to the Apollo AIM Input object settings panel.
   
2. In the Internal variable drop-down list select the required Apollo Internal Variable object (1).
3. In the IV Term drop-down list select the Apollo Term object corresponding to a term to be controlled by the state of this Apollo AIM Input object (2).

4. From the drop-down lists in the Operation with term, if input group select which values the term should have if the AIM input is not configured, armed, in a fault state or in an alarm (3). The following operations are available:

   Operation	Description
   No operation	The value of the corresponding term does not change
   Clear term	The term is set to FALSE
   Set term	The term is set to TRUE
   Send impulse	The value of the term changes to the opposite for a short preset period

5. Click Apply (4).
6. To save the changes to the controller, write configuration to hardware.

Associating AIM input with a term is completed.