To install the Axxon Next Client in Linux OS, do the following:

Attention!

The Client installation is possible only after getting the same Server version installed (see Installing the Axxon Next Server in Linux OS).

  1. For the automatical installation from the repository:

    1. Add the repositories by sequentially executing the following commands:

      echo 'deb [arch=amd64] http://download.axxonsoft.com/debian-repository stretch main' | sudo tee -a /etc/apt/sources.list.d/axxonsoft.list 
echo 'deb [arch=amd64] http://download.axxonsoft.com/debian-repository stretch backports/main' | sudo tee -a /etc/apt/sources.list.d/axxonsoft.list 
wget --quiet -O - "http://download.axxonsoft.com/debian-repository/info@axxonsoft.com.gpg.key" | sudo apt-key --keyring /etc/apt/trusted.gpg.d/axxonsoft.gpg add - && sudo apt-get update

    2. If you use Ubuntu 20.04, then install the mono-complete from the stretch repository:

      apt-get install mono-complete -t stretch

    3. Run the command:

      sudo apt-get install axxon-next-client

    4. During installation, it will be necessary to specify the maximum size of log files in megabytes and log level.


      Note

      The specified value can be changed (see Configuring the Axxon Next Client logging parameters on Linux OS). To do this, execute the command:

      sudo dpkg-reconfigure axxon-next-client

  2. For the manual installation:
    1. Go to the downloaded deb-packages folder.

    2. Execute the following commands:

      sudo dpkg -i axxon-next-client-bin_4.5.1.9763_amd64.deb
sudo dpkg -i axxon-next-client_4.5.1.9763_all.deb

      where 4.5.1.9763 is the version and build number.


After the installation is complete, the Client icon will be displayed in the application menu.

Attention!

It is not recommended to run the Client as root user or with root permissions.

By default, at the first Client start, the OS interface language will be used. To change the language of the Client's interface at the first start, do the following:

  1. Run the following command.

    sudo dpkg-reconfigure axxon-next-client

  2. Select the required language.

    Note

    This should be configured separately for each OS user.

    Attention!

    After you run the Client, select the interface language for the next launches in the settings (see Selecting the interface language).

  • No labels