To configure the detection tool:

  1. Select an object.

  2. Configure parameters for the captured face (just as with detected objects, see Setting up objects to be detected (target objects)).

    Attention!

    Select the Object class: Any or Face.

    Note

    Face color is not detected during Facial recognition, so there are no color settings.

  3. Set the maximum time an object can stay in the zone. When the maximum time is exceeded, the detection tool is triggered. This value should be in the range [0, 3600].
  4. Set an area inside FoV for detection. This is similar to the situation analysis configuration (see Configuring the Detection Zone).
  5. Click the Apply button
  • No labels