The Settings panel of the Computer object

The appearance of the settings panel of the Computer object is shown in the figures. The description of the parameters of the Computer object settings panel is given in the table below the figures.

The Archive disks and Basic settings tabs:

The Operator tab:

The Protocol synchronization tab:

The Archive synchronization tab

№	Parameter	Method for setting the parameter value	Parameter description	Representation	Default value	Value range
1	Network name*	Automatically	Displays the computer name in the local network	Numbers, letters, periods, hyphen, dash, underscore and any symbols	-	Depends on the number of the Computer objects registered in the system. Number of symbols—from 1 to 15
2	Name*	Enter the value in the field	Sets the name of the Computer object in the system	Latin, Cyrillic and service characters	Computer	A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive. Number of characters—from 1 to 60
3	Disable	Set the checkbox	Defines the condition (enabled or disabled) of the Computer object in the system	Boolean type	Clear	Set—the Computer object is disabled and isn't in use Clear—the Computer object is enabled and is in use
The Archive disks tab
4	Video	Set the checkbox	Sets the disk for storing video archive from cameras and also audio archive during synchronous audio and video recording	Boolean type	Clear	Set—the disk is used for video archive storing Clear—the disk is not used for video archive storing
5	Audio	Set the checkbox	Sets the disk for storing audio archive from microphones	Boolean type	Clear	Set—the disk is used for audio archive storing from microphones Clear—the disk is not used for audio archive storing from microphones
6	Disk	Automatically, enter the value in the field	Displays the names of the local disks, accessible for storing video and audio archive, and also used to specify the network disks used for archive storing	Names of the local disks (Latin characters), names of the network disks (UNC paths)	-	Depends on the total number of the local and network disks
7	GB	Automatically	Displays the amount of free space on each available disk	Disk space in GB	-	Depends on the total free disk space
8	Recording	Automatically	Displays the current disk for the archive recording	Boolean type	Clear	Set—the archive is currently recorded on the specified disk Clear—the archive isn't currently recorded on the specified disk
The Basic settings tab
9	Connection	Enter the value in the field	Sets the name to the modem connection used in Windows	Latin, Cyrillic and service characters	-	A line containing a sequence of any characters (letters, digits, service characters). Number of characters—from 1 to 30
10	Username	Enter the value in the field	Sets the login of the modem connection used in Windows	Latin, Cyrillic and service characters	-	A line containing a sequence of any characters (letters, digits, service characters). Number of characters—from 1 to 30
11	Password	Enter the value in the field	Sets the password of the modem connection used in Windows	Latin, Cyrillic and service characters	-	A line containing a sequence of any characters (letters, digits, service characters). Number of characters—from 1 to 30
12	Disable logging	Set the checkbox	Disables the event logging to the Event Viewer database on the local computer	Boolean type	Clear	Set—events aren't logged to the Event Viewer database Clear—events are logged to the Event Viewer database
13	Only local protocols	Set the checkbox	Enables logging to the Events Viewer database only the information about the events, registered on this computer	Boolean type	Clear	Set—only the events, registered on this computer are logged to the Events viewer database Clear—all required events are logged to the Events Viewer database
14	Time synchronization	Set the checkbox	Sets the time synchronization of all computers in the distributed system with the system time of this computer. Time is automatically synchronized at midnight every 24 hours or when Axxon PSIM is started on the Server that is the source of the time synchronization	Boolean type	Clear	Set—time is synchronized Clear—time isn't synchronized
15	Events archive length	Enter the value in the field	Sets the event storage period for: events registered in the system on the local computer (Protocol table in the Psim database or in a separate database) Incident server events (table PROTOCOL_INC_SERVER in the Psim database)	Days	-	More than 1
16	Run x64 modules	Set the checkbox	Sets the way to run the 64-bits modules	Boolean type	Up to 4.10.2—Clear From 4.10.3—Set	Set—when you attempt to run a module, the 64-bits module variant runs. If such a variant isn't found, the 32-bits module runs Clear—64-bits modules don't run
17	Use as client	Set the checkbox	Indicates that the computer is a Client in the distributed video surveillance system	Boolean type	Clear	Set—computer is used as a Client Clear computer is used as a Server or a RAW
18	Prevent Sleep mode	Set the checkbox	If the checkbox is set, when Axxon PSIM is running, Windows OS sleep mode settings will be blocked, and the computer won't enter the sleep mode	Boolean type	Set	Set—computer doesn’t enter the sleep mode Clear—computer enters the sleep mode
19	Initial display	Select from the list	Sets the default Display to be displayed after starting Axxon PSIM. If no Display is selected, the last active display will be displayed after Axxon PSIM starts	Names of the Display objects registered in the system	-	Depends on total number of Display objects registered in the system
20	Default user	Select from the list	Sets a default user, i.e. the user with the rights and permissions to start Axxon PSIM without a password	Names of the users registered in the system	-	The list of users registered in Axxon PSIM
21	Camera discovery tool	Click the button	Access to creating, configuring and editing IP devices	-	-	The IP Wizard window will open; its settings are described on the Camera discovery tool page
The Operator tab
22	Speaker	Select from the list	Allows selecting the speaker that should be use for audio signal playback (used when organizing a video surveillance system using SIP-devices—see Configuring SIP-terminal)	Names of the Speaker objects registered in the system	-	Depends on number of the Speaker objects registered in the system
23	Microphone	Select from the list	Allows selecting the microphone that should be used for audio signal transmission (used when organizing a video surveillance system using SIP-devices—see Configuring SIP-terminal)	Names of the Microphone objects registered in the system	-	Depends on number of the Microphone objects registered in the system
24	Camera	Select from the list	Allows selecting the camera that should be used for video signal transmission (used when organizing a video surveillance system using SIP-devices—see Configuring SIP-terminal)	Names of the Camera objects registered in the system	-	Depends on number of the Camera objects registered in the system
The Protocol synchronization tab
25	Synchronize	Set the checkbox	Sets the synchronization of the local computer and remote computer Event Viewer databases	Boolean type	Clear	Set—local and remote computers Event Viewer databases are synchronized Clear—local and remote computers Event Viewer databases aren't synchronized
26	Computer	Automatically	Displays the network name of the remote computer with which you want to synchronize the Event Viewer database	Latin and service characters	-	Depends on the number of the Computer objects registered in the system
27	Name	Automatically	Displays the name of remote computer in the network	Latin, Cyrillic and service characters		A line containing a sequence of any characters (letters, digits, service characters), case-sensitive. Number of characters—from 1 to 60
28	Change Connection String	Click the button	Access to settings and editing the parameters of connection to the remote computer Event viewer database	-	-	-
The Archive synchronization tab
29	Number	Select from the list	Sets the ID of the camera the archive of which should be synchronized when restoring the main Server (see also Configuring archive synchronization of main and backup Servers)	IDs of the Camera objects created in the objects tree of the main Server	-	Depends on the number of the Camera objects registered in the system
30	Name	Select from the list	Sets the name of the camera the archive of which should be synchronized when restoring the main Server (see also Configuring archive synchronization of main and backup Servers)	Names of the Camera objects created in the objects tree of the main Server	-	Depends on the number of the Camera objects registered in the system
31	Backup archive	Select from the list	Sets the Backup archive object configured to cooperate with the Failover service and used to synchronize the archives of the main and backup Servers (see also Configuring archive synchronization of main and backup Servers)	Names of the Backup archive objects registered in the system	-	Depends on the number of the Backup archive objects registered in the system
32	Range	Click the button	Opens a dialog box for adding and editing cameras in groups	-	-	-
33	All	Click the button	Adds all available cameras to the table	-	-	-

Page tree

Documentation for Axxon PSIM 1.0.0-1.0.1.