Documentation for Axxon PSIM 1.0.0-1.0.1.

Previous page Features of using VIDEOTEC DCZ keyboard  Configuring control of PTZ IP camera using the control panel Next page


Configuration of PTZ IP cameras differs from that of other PTZ devices.

PTZ IP cameras are connected via the local net via the TCP/IP transport protocol. Uniform communication protocol is used for all PTZ IP cameras.

Configure the Telemetry Controller object as follows:

  1. Go to the Hardware tab in the System settings dialog box (1).
  2. Create the Telemetry Controller system object under the Computer object or select the relevant object in the Hardware tab of the System settings dialog box (2).
  3. Specify the ID, the name of the Telemetry Controller object and select the Server connected with the PTZ device (3)

  4. Select the data exchange protocol in the list. To use TCP/IP protocol for the data exchange with a PTZ IP camera, select IP camera as the protocol (4).

    Note

    When the IP camera item is selected on the Settings panel of the Telemetry Controller object, the other settings cannot be changed.

    Note

    If Bosch VG5 AutoDome 700 Series camera is in use, select the Bosch-Autodome 1.0 protocol, for Bosch VG4 AutoDome and Bosch VG5 AutoDome 800 Series cameras select Bosch-Autodome 4.0.

  5. To save all the changes, click the Apply button (5).

Note

The PTZ device object configuration for PTZ IP camera control is the same as for control over PTZ devices when they are connected via the Server's COM port.