Documentation for Axxon PSIM 1.0.0-1.0.1.

Previous page Setting the Charts window position on the screen  Configuring the SIP-panel interface object Next page


Select objects to display on the chart and set the number of points as follows:

  1. Go to the Charts object settings panel.
  2. From the Number drop-down list, select the Analog sensor object ID according to the preset analog sensor (1). See also Creating and configuring connection with the Analog sensor (input).
  3. The Name is filled automatically after ID selection (2).
  4. From the Color drop-down list, select the color to mark the sensor readings on the chart in the Charts window (3).
  5. In the Line width field, enter the line width in pixels (4). The value must be integer: if you enter an incorrect value, the default line width (5 pixels) is applied.
  6. In the Number of pixels field, set the number of points to display on the chart (5).
  7. Click Apply (6).

Selecting objects to display on the chart and setting the number of points is now complete.

  • No labels