Documentation for Axxon PSIM 1.0.0-1.0.1.

Previous page Using network disks  Configuring video frame rate Next page


Axxon PSIM™ software supports automatic video recording upon alarm registration for each Camera object individually. By default, the auto recording option is enabled for all cameras in the Hardware tab.

The auto recording option is disabled for each camera individually, as well.

To disable the auto recording upon alarm option for a selected camera, do the following:

  1. Go to the Hardware tab in the System settings dialog box (1).
  2. Select the Camera object corresponding to the required camera in the objects tree (2). The settings panel for the selected object is displayed on the right of the Hardware tab.
  3. Go to the Basic settings tab on the settings panel of the Camera object (3).
  4. Set the Record alarms checkbox unchecked (4).
  5. Click the Apply button (5).

Automatic recording upon alarm event registration is now disabled.

Note.

To re-enable the auto recording, repeat the above steps and set the Record alarms checkbox.

Events recording

  • No labels