The Settings panel of the PTZ device object

The PTZ device object is used to register and configure the PTZ device in Axxon PSIM.

The settings panel of the PTZ device object is shown in the figure.

The Main tab.

The Calibration tab.

Table describes the parameters of the settings corresponding to the elements of the settings panel of the PTZ device object.

№	Parameter	Method for setting the parameter value	Parameter description	Representation	Default value	Value range
1	Identification number*	Automatically	Displays the identification number of the PTZ device object in the digital video surveillance system with the distributed architecture	Numbers, letters, periods, hyphen, dash and underscore	-	Depends on the number of the PTZ device objects in the digital video surveillance system with the distributed architecture
2	Name*	Enter the value into the field	Sets the name of the PTZ device object in the digital video surveillance system with the distributed architecture	Latin, Cyrillic characters and service characters	PTZ device	A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive. Number of characters—from 1 to 60
3	Disable	Set the checkbox	Sets the state of the PTZ device object (enabled or disabled) in the digital video surveillance system with the distributed architecture	Boolean type	Clear	Set—the PTZ device object is disabled and isn't used Clear—the PTZ device object is enabled and is used
4	Telemetry Controller	Select the value from the list	Sets the Telemetry Controller parent object of the digital system with the distributed architecture, to which the given PTZ device object belongs	Name of the PTZ device objects registered in the system	Name of the Telemetry Controller parent object	Depends on the number of the telemetry controllers in the digital system with the distributed architecture
The Camera group
5	Number	Select the value from the list	Set the identification number of the video camera, where the PTZ device is installed	Sequence of numbers	Not defined	Depends on the number of video cameras in the digital video surveillance system with the distributed architecture
6	Camera	Select the value from the list	Matches the PTZ device with the video camera, where it is installed. The parameter is used by the Video surveillance monitor and the Telemetry panel to control the PTZ devices of the video cameras	Name of the Camera objects registered in the system	No	Depends on the number of the Camera objects in the digital video surveillance system with the distributed architecture
7	Presets	Set the checkbox	Selects the presets that should be displayed in the Telemetry control panel	Boolean type	Clear	Up to 355 presets can be enabled. The maximum number depends on the device, see Appendix 6. Maximum number of presets for IP devices. Set—the preset name is displayed in the Telemetry control panel Clear—the preset name isn't displayed in the Telemetry control panel
7	Name	Enter the value into the field	Sets the preset name to display on the Telemetry control panel	Latin, Cyrillic characters and service characters	Preset	A line containing a sequence of any characters (letters, digits, service characters), case-insensitive
8	Select/Deselect	Set the checkbox	Sets/clears the checkboxes next to all the elements in the Presets table	Boolean type	Clear	Set—select all presets Clear—deselect all presets
The PTZ speed group
9	Min	Enter the value into the field	Sets the minimum possible speed of optical zoom on the PTZ device	Speed in standard units	0	1 – 10
10	Max	Enter the value into the field	Sets the maximum possible speed of optical zoom on the PTZ device	Speed in standard units	0	1 – 10
The Mouse group
11	Min	Enter the value into the field	Sets the minimum possible rotation speed of the PTZ devices from the Video surveillance monitor	Speed in standard units	0	1 – 10
12	Max	Enter the value into the field	Sets the maximum possible rotation speed of the PTZ devices from the Video surveillance monitor	Speed in standard units	0	1 – 10
The Joystick group
13	Min	Enter the value into the field	Sets the minimum possible rotation speed of the PTZ devices using the joystick	Speed in standard units	0	1 – 10
14	Max	Enter the value into the field	Sets the maximum possible rotation speed of the PTZ devices using the joystick	Speed in standard units	0	1 – 10
The Point&Click group
15	Min	Enter the value into the field	Sets minimum possible rotation speed of the PTZ device in the direction of the mouse click (Point&Click)	Speed in standard units	0	1 – 10
16	Max	Enter the value into the field	Sets maximum possible rotation speed of the PTZ device in the direction of the mouse click (Point&Click)	Speed in standard units	0	1 – 10
Not in the groups
17	Device address	Enter the value into the field	Sets the address of the PTZ device installed via hardware (with jumpers on the PTZ device board) or software (with a special software for the PTZ devices firmware upgrade)	Sequence of numbers	1	Integer from 1 to 255. Depends on the PTZ device protocol
18	Force disabling continuous PTZ mode	Set the checkbox	Sets the PTZ control mode: continuous or discrete	Boolean type	0	0—the continuous PTZ control mode is enabled 1—the discrete PTZ control mode is enabled
The Calibration tab
19	update	Click the button	Gets data on the current camera position and display them in the pan, tilt, zoom fields	-	-	-
20	pan	Automatically on clicking the update button	Panoraming of the PTZ device	Integer	-	Depends on the model of the connected PTZ device
21	tilt	Automatically on clicking the update button	Tilt of the PTZ device	Integer	-	Depends on the model of the connected PTZ device
22	zoom	Automatically on clicking the update button	Scaling (zooming) of the PTZ device	Sequence of numbers	-	Depends on the model of the connected PTZ device
23	x	Enter the value into the field	The X coordinate of the point on the map corresponding to the selected position of the camera		-	Depends on the map size
24	y	Enter the value into the field	The Y coordinate of the point on the map corresponding to the selected position of the camera		-	Depends on the map size

*Name of the element is not displayed in the settings panel of the given object.

Page tree

Documentation for Axxon PSIM 1.0.0-1.0.1.