The Settings panel of the Telemetry controller object

The Telemetry Controller object is used to register and configure in Axxon PSIM the serial (COM) ports used for connecting the PTZ devices.

The settings panel of the Telemetry Controller object is shown in the figure.

Table describes the parameters of the settings corresponding to the elements of the settings panel of the Telemetry Controller object.

№	Parameter	Method for setting the parameter value	Parameter description	Representation	Default value	Value range
1	Identification number*	Automatically	Displays the identification number of the Telemetry Controller object in the digital video surveillance system with the distributed architecture	Numbers, letters, periods, hyphen, dash and underscore	-	Depends on the number of the Telemetry Controller objects in the igital video surveillance system with the distributed architecture
2	Name*	Enter the value into the field	Sets the name of the Telemetry Controller object in the digital video surveillance system with the distributed architecture	Latin, Cyrillic characters and service characters	Telemetry Controller No.	A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive. Number of characters—from 1 to 60
3	Disable	Set the checkbox	Sets the state of the Telemetry Controller object (enabled or disabled) in the digital video surveillance system with the distributed architecture	Boolean type	Clear	Set—the Telemetry Controller object is disabled and isn't used Clear—the Telemetry Controller object is enabled and is used
4	Computer	Select the value from the list	Sets the Computer parent object of the digital system with the distributed architecture, to which the given Telemetry Controller object belongs	Name of the Computer objects registered in the system	Name of the Computer parent object	Depends on the number of the Computer objects in the digital system with the distributed architecture
The Settings group
5	Controller type*	Select the value from the list	Sets the data communication protocol with the PTZ device via the serial (COM) port. Data communication protocols are supplied by the PTZ devices manufacturers	Name of the PTZ devices integrated in the system	Videotec	Corresponds to the list of the PTZ devices integrated in the system
6	Port	Select the value from the list	Sets the number of the computer COM port, used to connect the PTZ devices	List of the available COM ports	COM1	Depends on the number of COM ports on the Server or Remote Administrator’s workstation. If a non-null value is selected, then the local COM port has a higher priority than other devices when processing the PTZ device commands. Otherwise, the COM port priority is set by default
7	Rate	Select the value from the list	Sets the data communication rate via the COM port	kB/s	9600	From 300 to 256000
8	Parity	Select the value from the list	Sets the parity check mode for the data transfer via the COM port	List of parity check names and modes	None	Even, Odd, None, Mark, Space
9	DTR	Set the checkbox	Sets the power supply to the PTZ device via the output of the DTR COM port	Boolean type	Set	Set—the power will be supplied via the DTR port output Clear—the power will not be supplied via the DTR port output
10	RTS	Set the checkbox	Sets the power supply to the PTZ device via the output of the RTS COM port	Boolean type	Set	Set—the power will be supplied via the RTS port output Clear—the power will not be supplied via the RTS port output

*Name of the element is not displayed in the settings panel of the given object.

Page tree

Documentation for Axxon PSIM 1.0.0-1.0.1.