The Settings panel of the Videogate object

The settings panel of the Videogate object is shown in the figure.

Table describes the setting parameters of the Videogate system object.

№	Parameter	Method for setting the parameter value	Parameter description	Representation	Default value	Value range
1	Identification number	Automatically	Displays the identification number of the Videogate system object	Sequence of numbers	-	Depends on the number of the Videogate objects in the system
2	Name	Enter the value into the field	Sets the name of the Videogate object in the system	Latin, Cyrillic and service characters	Videogate	A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive. Number of characters—from 1 to 60
3	Disable	Set the checkbox	Sets the state (enabled or disabled) of the Videogate object in the system	Boolean type	Clear	Set—the Videogate object is disabled and isn't used Clear—the Videogate object is enabled and used
4	Computer	Select the value from the list	Sets the Computer parent object for the given Videogate object	Name of the Computer objects registered in the system	Name of the Computer parent object	Depends on the number of the Computer objects in the system
5	All	Click the button	Selects all video cameras registered in the system for transmitting the video signals through the Videogate	-	-	-
6	Range	Click the button	Gives the access to the complex selection of video cameras for transmitting video signals through the Videogate	-	-	-
7	Number	Select the value from the list	Sets the number of the video camera for transmitting video signals through the Videogate	Sequence of numbers	-	Depends on the number of the video cameras registered in the system
8	Name	Select the value from the list	Sets the name of the video camera for transmitting video signals through the Videogate	Names of the cameras registered in the system	-	Depends on the number of the video cameras registered in the system
9	Stream for archive	Select the value from the list	Set the video stream to record the archive of the Videogate module	Names of streams transmitted by the Server	-	Depends on the number of the video streams configured on the Server
10	Compression	Select the value from the list	Sets the level of video signal compression for transmitting through the Videogate. If the value is set, the additional consumption of the Server resources occurs	Sequence of numbers	-	In order of increasing the compression level 0, 1, 2, 3, 4, 5. 0—no compression 5—maximum compression
11	Compressor	Select the value from the list	Sets the algorithm to compress the video stream used to recompress the video signal when transmitted through the Videogate. If the compressor is specified, you should select the value in the Compression drop-down list	List of the available algorithms	-	MJPEG, Motion Wavelet 3.5, MPEG4. If the Compression level is specified, but the Compressor isn't selected, the Motion Wavelet algorithm is used
12	fps	Enter the value into the field	Sets the video signal frame rate for transmitting through the Videogate	Sequence of numbers	-	No more than the rate of the video signal digitizing by the video capture card. No less than 0.01
13	Critical rate	Enter the value into the field	Sets the minimum permissible rate of the video signal frames arrival to the Videogate to control the transmission of the video signal through the local network	Sequence of numbers	-	No more than the frame rate of the video signal that is transmitted to the Videogate
14	Gate	Select the value from the list	Sets the Videogate object from which the video signal from the selected camera has to be transmitted to the given Videogate. *Attention!* The selected Videogate object must differ from the configured one, otherwise there will be no video transmission via the Videogate	Names of the Videogate objects registered in the system	-	Depends on the number of the Videogate objects registered in the system
15	Backup archive	Select the value from the list	Sets the Backup archive object, from which the archive from the selected camera has to be transmitted to the given Videogate	Names of the Backup archive objects registered in the system	-	Depends on the number of the Backup archive objects registered in the system
16	Store no more than (hours)	Enter the value into the field	Sets the time period in hours after which it is necessary to delete the recordings of the corresponding camera from the Videogate	Sequence of numbers	-	>0
17	Video	Set the checkbox	Sets the disk for storing the archive of the video signals, transmitted through the Videogate	Boolean type	Clear	Set—the disk is used for storing the archive of the Videogate module Clear—the disk isn't used for storing the archive of the Videogate module
18	Disk	Automatically	Displays the names of the local (network, USB) disks, available for storing the archive of the Videogate module	Names of the available disks (Latin characters)	-	Depends on the total number of the availabe disks
19	GB	Automatically	Displays the information about free space on every available disk	Disk space in GB	-	Depends on the amount of free disk space
20	Constant recording	Set the checkbox	Enables constant recording on all video cameras added to the Videogate	Boolean type	Clear	Set—constant recording is enabled on all video cameras added to the Videogate Clear—recording is enabled on the video cameras that are configured for recording on the Server
21	Active cameras	Set the checkbox	Enables recording only on the video cameras the video stream from which is requested and displayed on the Video surveillance monitor	Boolean type	Clear	Set—recording is enabled on the video cameras the video stream from which is requested (displayed) on the Video surveillance monitor Clear—recording is enabled on the video cameras that are configured for recording on the Server

Page tree

Documentation for Axxon PSIM 1.0.0-1.0.1.